# 12v brake switch to CAM#2 input on V3

**URL:** <https://community.ecumaster.com/t/12v-brake-switch-to-cam-2-input-on-v3/1885>\
**Category:** V3 SOFTWARE\
**Created:** [July 23, 2024, 8:58am UTC](https://community.ecumaster.com/t/12v-brake-switch-to-cam-2-input-on-v3/1885 "2024-07-23T08:58:30Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wtd](https://avatars.discourse-cdn.com/v4/letter/w/e19adc/32.png) [@Wtd](https://community.ecumaster.com/u/Wtd)\
**Post date:** [July 23, 2024, 8:58am UTC](https://community.ecumaster.com/t/12v-brake-switch-to-cam-2-input-on-v3/1885/1 "2024-07-23T08:58:30Z")

</div>

Hi can someone confirm that V3 no longer allows the use of CAM #2 to have a 12v signal input from the brake switch?

Thanks

---

<div class="post-metadata">

**Author:** ![Greg](https://avatars.discourse-cdn.com/v4/letter/g/71c47a/32.png) [@Greg](https://community.ecumaster.com/u/Greg)\
**Post date:** [July 23, 2024, 9:07am UTC](https://community.ecumaster.com/t/12v-brake-switch-to-cam-2-input-on-v3/1885/2 "2024-07-23T09:07:05Z")

</div>

set digital cam 2 input as hall and pull down than use it as user switch and set it on brake input…

---

<div class="post-metadata">

**Author:** ![Wtd](https://avatars.discourse-cdn.com/v4/letter/w/e19adc/32.png) [@Wtd](https://community.ecumaster.com/u/Wtd)\
**Post date:** [July 23, 2024, 8:49pm UTC](https://community.ecumaster.com/t/12v-brake-switch-to-cam-2-input-on-v3/1885/3 "2024-07-23T20:49:50Z")

</div>

Thanks for your help! It now works correctly 🙂