# 2jzge WBO wiring with a pnp adapter

**URL:** <https://community.ecumaster.com/t/2jzge-wbo-wiring-with-a-pnp-adapter/5721>\
**Category:** EMU BLACK / CLASSIC\
**Created:** [May 2, 2026, 10:10pm UTC](https://community.ecumaster.com/t/2jzge-wbo-wiring-with-a-pnp-adapter/5721 "2026-05-02T22:10:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![npc42](https://avatars.discourse-cdn.com/v4/letter/n/8e7dd6/32.png) [@npc42](https://community.ecumaster.com/u/npc42)\
**Post date:** [May 2, 2026, 10:10pm UTC](https://community.ecumaster.com/t/2jzge-wbo-wiring-with-a-pnp-adapter/5721/1 "2026-05-02T22:10:41Z")

</div>

I have a quick question about how people are adding their wbo who are using the pnp adapters. Are you intercepting the wires in between the pnp and ecu or are you utilizing the stock 3rd o2 sensor wiring (if that’s even possible)?

thanks in advance!

---

<div class="post-metadata">

**Author:** ![FloorItGarage](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/flooritgarage/32/61_2.png) [@FloorItGarage](https://community.ecumaster.com/u/FloorItGarage)\
**Post date:** [May 3, 2026, 5:40am UTC](https://community.ecumaster.com/t/2jzge-wbo-wiring-with-a-pnp-adapter/5721/2 "2026-05-03T05:40:30Z")

</div>

Intercept the wiring between the ecu and PNP adapter.

The PNP adapter won’t use the wideband O2 controller pins, aside from 12V switched power. I usually splice that off the ECU’s power and run the other 5 wires direct into the ecu.

---

<div class="post-metadata">

**Author:** ![npc42](https://avatars.discourse-cdn.com/v4/letter/n/8e7dd6/32.png) [@npc42](https://community.ecumaster.com/u/npc42)\
**Post date:** [May 3, 2026, 5:15pm UTC](https://community.ecumaster.com/t/2jzge-wbo-wiring-with-a-pnp-adapter/5721/3 "2026-05-03T17:15:52Z")

</div>

Sweet! Thanks for the info!