# 3sge primary and cam trigger settings

**URL:** <https://community.ecumaster.com/t/3sge-primary-and-cam-trigger-settings/4288>\
**Category:** EMU BLACK / CLASSIC\
**Created:** [August 23, 2025, 11:22am UTC](https://community.ecumaster.com/t/3sge-primary-and-cam-trigger-settings/4288 "2025-08-23T11:22:06Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![3sgeBeams](https://avatars.discourse-cdn.com/v4/letter/3/c57346/32.png) [@3sgeBeams](https://community.ecumaster.com/u/3sgeBeams)\
**Post date:** [August 23, 2025, 11:22am UTC](https://community.ecumaster.com/t/3sge-primary-and-cam-trigger-settings/4288/1 "2025-08-23T11:22:06Z")

</div>

Hi guys, I’m new here. I’m looking for some with my 3sge beams and emu black. Can’t seem to get the trigger settings right to get it to idle. I’ll upload my scope and file ,hopefully someone can point me in the right direction and point out mistakes to correct

 ![17559480269772437318187240646556](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/2/286d4d8d44e8069610fa241f980ef1a77170af74.jpeg)

---

<div class="post-metadata">

**Author:** ![Romjer](https://avatars.discourse-cdn.com/v4/letter/r/aca169/32.png) [@Romjer](https://community.ecumaster.com/u/Romjer)\
**Post date:** [August 26, 2025, 5:45am UTC](https://community.ecumaster.com/t/3sge-primary-and-cam-trigger-settings/4288/2 "2025-08-26T05:45:39Z")

</div>

Crank - same as in 3sgte/

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/d/d4a53da3743f71cb9da061f38465a9b954dd3ede.png)

---

<div class="post-metadata">

**Author:** ![3sgeBeams](https://avatars.discourse-cdn.com/v4/letter/3/c57346/32.png) [@3sgeBeams](https://community.ecumaster.com/u/3sgeBeams)\
**Post date:** [August 26, 2025, 8:14am UTC](https://community.ecumaster.com/t/3sge-primary-and-cam-trigger-settings/4288/3 "2025-08-26T08:14:16Z")

</div>

Thanks , I’ll give it a try tonight after work and report

---

<div class="post-metadata">

**Author:** ![Romjer](https://avatars.discourse-cdn.com/v4/letter/r/aca169/32.png) [@Romjer](https://community.ecumaster.com/u/Romjer)\
**Post date:** [August 26, 2025, 8:34am UTC](https://community.ecumaster.com/t/3sge-primary-and-cam-trigger-settings/4288/4 "2025-08-26T08:34:17Z")

</div>

before start - use physical stroboscope, and everything else other from thease document

> **[ECUMaster EMU First Start Checklist.docx](https://docs.google.com/document/d/1OeFUfmtrOExWCewCJPEql6dDqlQgwm_P/edit?tab=t.0)**
>
> After installation and following through to the end of the “EMU First Start Checklist” document, see the “FAQ and Troubleshooting” document link on the ECUMasterUSA.com downloads page for much more information on frequently asked questions such as...