# 4g63t Goes leaner and leaner until it doesn´t run **URL:** \ **Category:** EMU BLACK / CLASSIC\ **Created:** [June 8, 2024, 1:50pm UTC](https://community.ecumaster.com/t/4g63t-goes-leaner-and-leaner-until-it-doesn-t-run/1576 "2024-06-08T13:50:07Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![Fear](https://avatars.discourse-cdn.com/v4/letter/f/d6d6ee/32.png) [@Fear](https://community.ecumaster.com/u/Fear)\ **Post date:** [June 8, 2024, 1:50pm UTC](https://community.ecumaster.com/t/4g63t-goes-leaner-and-leaner-until-it-doesn-t-run/1576/1 "2024-06-08T13:50:08Z")
Greetings! 😃 Emu Classic I got an 96 Eclipse gsx with a built e3 engine. stroked to 2.3l, forged rods & pistons, arp, balanceshaft delete, ported head, very aggressive cams, 68mm turbo, walbro 525 fuelpump, bosch 2200cc high impedance injectors, vag ignitioncoils,18-1 triggerwheel & modified cas for sync and so on. Got ego, fpr, egt and such connected and logged. I bulit the car for probably 7-8 years ago and had it run with the emu classic with both a smaller 2.0l engine and this 2.3l and it worked well. now a couple of years later when i rebuilt and upgraded the engine and got a new ecu i cant get it to work for me, and i don´t know what i have done / done wrong with the setup? its on speed density, i got injectors size set to 700cc and still the Ve table is around 130 at 2000rpm in neutral. as of now it runs on 95octane until i get it to function properly. the injectors are new, fuelpressure stable and as the engine gets warmer it goes leaner and leaner until it doesnt run. I was wondering if someone experienced would like to take a look at my project and logfile to maybe locate what is off? or if you have any suggestions? Best regards ---
**Author:** ![GC8\_Lover](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/gc8_lover/32/1097_2.png) [@GC8\_Lover](https://community.ecumaster.com/u/GC8_Lover)\ **Post date:** [June 9, 2024, 6:54pm UTC](https://community.ecumaster.com/t/4g63t-goes-leaner-and-leaner-until-it-doesn-t-run/1576/2 "2024-06-09T18:54:25Z")
I’m not that great of a tuner, but could I see the project and the logfile to see how it behaves like in detail? Perhaps I could give an answer or two ---
**Author:** ![Fear](https://avatars.discourse-cdn.com/v4/letter/f/d6d6ee/32.png) [@Fear](https://community.ecumaster.com/u/Fear)\ **Post date:** [June 9, 2024, 7:17pm UTC](https://community.ecumaster.com/t/4g63t-goes-leaner-and-leaner-until-it-doesn-t-run/1576/3 "2024-06-09T19:17:28Z")
Hi! Ofcourse, you know any good site to upload the files?😁 ---
**Author:** ![GC8\_Lover](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/gc8_lover/32/1097_2.png) [@GC8\_Lover](https://community.ecumaster.com/u/GC8_Lover)\ **Post date:** [June 9, 2024, 7:38pm UTC](https://community.ecumaster.com/t/4g63t-goes-leaner-and-leaner-until-it-doesn-t-run/1576/4 "2024-06-09T19:38:13Z")
You could use google drive and share the link for the files here ---
**Author:** ![Fear](https://avatars.discourse-cdn.com/v4/letter/f/d6d6ee/32.png) [@Fear](https://community.ecumaster.com/u/Fear)\ **Post date:** [June 9, 2024, 8:15pm UTC](https://community.ecumaster.com/t/4g63t-goes-leaner-and-leaner-until-it-doesn-t-run/1576/5 "2024-06-09T20:15:32Z")
Ok, i’ll fix it tomorrow​:grin:👌🏻 Thanx! ---
**Author:** ![GC8\_Lover](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/gc8_lover/32/1097_2.png) [@GC8\_Lover](https://community.ecumaster.com/u/GC8_Lover)\ **Post date:** [June 11, 2024, 5:07pm UTC](https://community.ecumaster.com/t/4g63t-goes-leaner-and-leaner-until-it-doesn-t-run/1576/6 "2024-06-11T17:07:58Z")
Could you get it sorted out? I’m honestly curious about it ---
**Author:** ![Fear](https://avatars.discourse-cdn.com/v4/letter/f/d6d6ee/32.png) [@Fear](https://community.ecumaster.com/u/Fear)\ **Post date:** [June 11, 2024, 5:22pm UTC](https://community.ecumaster.com/t/4g63t-goes-leaner-and-leaner-until-it-doesn-t-run/1576/7 "2024-06-11T17:22:16Z")
Sorry, has not been home until now 😅 See if this works, new on google drive > **[Google Drive: Sign-in](https://accounts.google.com/v3/signin/identifier?continue=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F1dNfUSwjmhVlrmdVHJUS1XR86LF1bZ-Yx%2Fview%3Fusp%3Ddrive_link&followup=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F1dNfUSwjmhVlrmdVHJUS1XR86LF1bZ-Yx%2Fview%3Fusp%3Ddrive_link&ifkv=AS5LTAQI_Qv3DVQdaAq2xXsmU8OGqN1iwzVToW6DECU32gs97_sZ88jRGCn-hldwXvTUwBodaOoJ&osid=1&passive=1209600&service=wise&flowName=GlifWebSignIn&flowEntry=ServiceLogin&dsh=S1594503670%3A1718126511223217&ddm=0)** > > Access Google Drive with a Google account (for personal use) or Google Workspace account (for business use). > **[Google Drive: Sign-in](https://accounts.google.com/v3/signin/identifier?continue=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F12U6NkKjchY0mbcBoOeKgBgliXhsF4ofp%2Fview%3Fusp%3Ddrive_link&followup=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F12U6NkKjchY0mbcBoOeKgBgliXhsF4ofp%2Fview%3Fusp%3Ddrive_link&ifkv=AS5LTASlIFVL3Gf50VtAVMtUnVOtJ3pEMEI-D-wspHLIzwarQyV0tX6LL1GAGv_mC-XFbSXUHTqY&osid=1&passive=1209600&service=wise&flowName=GlifWebSignIn&flowEntry=ServiceLogin&dsh=S-1643491414%3A1718126533202509&ddm=0)** > > Access Google Drive with a Google account (for personal use) or Google Workspace account (for business use). ---
**Author:** ![GC8\_Lover](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/gc8_lover/32/1097_2.png) [@GC8\_Lover](https://community.ecumaster.com/u/GC8_Lover)\ **Post date:** [June 11, 2024, 5:23pm UTC](https://community.ecumaster.com/t/4g63t-goes-leaner-and-leaner-until-it-doesn-t-run/1576/8 "2024-06-11T17:23:41Z")
Yeah the links work, but you haven’t made the files accessible to others. I sent a request to access them. If you approve, I should be able to take a look ---
**Author:** ![Fear](https://avatars.discourse-cdn.com/v4/letter/f/d6d6ee/32.png) [@Fear](https://community.ecumaster.com/u/Fear)\ **Post date:** [June 11, 2024, 5:27pm UTC](https://community.ecumaster.com/t/4g63t-goes-leaner-and-leaner-until-it-doesn-t-run/1576/9 "2024-06-11T17:27:54Z")
sorry, i just made them accessible to all who has the links i think:) ---
**Author:** ![Romjer](https://avatars.discourse-cdn.com/v4/letter/r/aca169/32.png) [@Romjer](https://community.ecumaster.com/u/Romjer)\ **Post date:** [June 21, 2024, 3:55pm UTC](https://community.ecumaster.com/t/4g63t-goes-leaner-and-leaner-until-it-doesn-t-run/1576/10 "2024-06-21T15:55:17Z")
hi! did you make vacuum/boost leak check ?