# 8HP CANTCU Integration **URL:** \ **Category:** EMU PRO\ **Created:** [June 17, 2026, 9:58pm UTC](https://community.ecumaster.com/t/8hp-cantcu-integration/6047 "2026-06-17T21:58:50Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![Maciej.Ordowski\_ECUMASTER](https://avatars.discourse-cdn.com/v4/letter/m/e495f1/32.png) [@Maciej.Ordowski\_ECUMASTER](https://community.ecumaster.com/u/Maciej.Ordowski_ECUMASTER)\ **Post date:** [June 18, 2026, 7:32am UTC](https://community.ecumaster.com/t/8hp-cantcu-integration/6047/3 "2026-06-18T07:32:15Z")
Here you would find some guides for torque reduction, blips can be done similarly. > [@Torque Reduction with Turbo Lamik](https://community.ecumaster.com/t/torque-reduction-with-turbo-lamik/5787): > > Hi, I’m running a LS3 with Turbo Lamik 8HP. The Turbo Lamik sends a flag for torque reduction request as well as a 0-100% torque reduction value over CAN. My question is, how do I set up the torque reduction in EMU Pro? In the gearbox section there is no direct way to set this up. My current plan is set gearbox as planetary automatic and just leave it at the Toyota or GM 4L80 setting, then use the torque reduction table with y-axis set as the flag from the Turbo Lamik for torque reduction requ… --- _[View the full topic](https://community.ecumaster.com/t/8hp-cantcu-integration/6047)._