# Additional outputs - EMU Classic

**URL:** <https://community.ecumaster.com/t/additional-outputs-emu-classic/6483>\
**Category:** EMU BLACK / CLASSIC\
**Created:** [September 11, 2026, 8:48am UTC](https://community.ecumaster.com/t/additional-outputs-emu-classic/6483 "2026-09-11T08:48:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![matth](https://avatars.discourse-cdn.com/v4/letter/m/f475e1/32.png) [@matth](https://community.ecumaster.com/u/matth)\
**Post date:** [September 11, 2026, 8:48am UTC](https://community.ecumaster.com/t/additional-outputs-emu-classic/6483/1 "2026-09-11T08:48:58Z")

</div>

Hello,

I’m running an EMU Classic and have used all of my aux outputs and Camsync 2. Can I use spare injector or ignition outputs for a 2 wire IACV?

Thanks

---

<div class="post-metadata">

**Author:** ![matth](https://avatars.discourse-cdn.com/v4/letter/m/f475e1/32.png) [@matth](https://community.ecumaster.com/u/matth)\
**Post date:** [September 24, 2026, 1:07pm UTC](https://community.ecumaster.com/t/additional-outputs-emu-classic/6483/2 "2026-09-24T13:07:10Z")

</div>

Nevermind, found the bit in the manual about using spare injector outputs, all good 😊