# Additional sensors - R53 Mini PnP black **URL:** \ **Category:** EMU BLACK / CLASSIC\ **Created:** [March 25, 2026, 1:39pm UTC](https://community.ecumaster.com/t/additional-sensors-r53-mini-pnp-black/5427 "2026-03-25T13:39:19Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![vismundCygnus](https://avatars.discourse-cdn.com/v4/letter/v/ac8455/32.png) [@vismundCygnus](https://community.ecumaster.com/u/vismundCygnus)\ **Post date:** [March 25, 2026, 1:39pm UTC](https://community.ecumaster.com/t/additional-sensors-r53-mini-pnp-black/5427/1 "2026-03-25T13:39:19Z")
Hello! I’m just planning my engine wiring and I would like to add a couple of extra sensors to the car - most crucially an oil pressure sensor. I think I’m right in saying that there are some analogue inputs available on the grey or black plugs? But what I am interested in is knowing if there are any on the main ECU plug, as that would be a much tidier install for me. I am using a wideband and have removed the original narrow band wiring - can any of those pins be used as analogue inputs or digital input/outputs? Many thanks! ---
**Author:** ![noobtuner](https://avatars.discourse-cdn.com/v4/letter/n/e274bd/32.png) [@noobtuner](https://community.ecumaster.com/u/noobtuner)\ **Post date:** [March 26, 2026, 4:23am UTC](https://community.ecumaster.com/t/additional-sensors-r53-mini-pnp-black/5427/2 "2026-03-26T04:23:51Z")
> **[EMU\_Black\_pinout.pdf](https://www.ecumaster.com/wp/wp-content/uploads/2020/05/EMU_Black_pinout.pdf)** > > 689.57 KB ---
**Author:** ![Matthias\_avp](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/matthias_avp/32/5661_2.png) [@Matthias\_avp](https://community.ecumaster.com/u/Matthias_avp)\ **Post date:** [March 26, 2026, 1:11pm UTC](https://community.ecumaster.com/t/additional-sensors-r53-mini-pnp-black/5427/3 "2026-03-26T13:11:22Z")
[miniR53\_pnp\_manual.pdf](https://community.ecumaster.com/uploads/short-url/aMFBiPA5d8MIbN2Eqo7UlhwcilA.pdf) (2.1 MB) Here is the Manual for R53 PNP