# AFR value instead of lamda

**URL:** <https://community.ecumaster.com/t/afr-value-instead-of-lamda/1983>\
**Category:** ADU\
**Created:** [August 5, 2024, 5:21am UTC](https://community.ecumaster.com/t/afr-value-instead-of-lamda/1983 "2024-08-05T05:21:03Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![JetCaptain](https://avatars.discourse-cdn.com/v4/letter/j/9fc348/32.png) [@JetCaptain](https://community.ecumaster.com/u/JetCaptain)\
**Post date:** [August 5, 2024, 5:21am UTC](https://community.ecumaster.com/t/afr-value-instead-of-lamda/1983/1 "2024-08-05T05:21:03Z")

</div>

hello, how can you display afr instead of lamda value on the adu?

i tried using channel ecu.afr1 but does not work.

any insight please?

---

<div class="post-metadata">

**Author:** ![mkuklis\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/mkuklis_ecumaster/32/104_2.png) [@mkuklis\_ECUMASTER](https://community.ecumaster.com/u/mkuklis_ECUMASTER)\
**Post date:** [August 5, 2024, 10:50am UTC](https://community.ecumaster.com/t/afr-value-instead-of-lamda/1983/2 "2024-08-05T10:50:45Z")

</div>

Hi,  
Make a new table in the project tree.  
Use the channel name “t\_AFR” to display the value.

 ![obraz](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/4/47b28bd9b13119031bfe2207fa319f3e0bc5d9f2.png)

---

<div class="post-metadata">

**Author:** ![JetCaptain](https://avatars.discourse-cdn.com/v4/letter/j/9fc348/32.png) [@JetCaptain](https://community.ecumaster.com/u/JetCaptain)\
**Post date:** [August 5, 2024, 2:40pm UTC](https://community.ecumaster.com/t/afr-value-instead-of-lamda/1983/3 "2024-08-05T14:40:20Z")

</div>

Thank you will give it a try.

---

<div class="post-metadata">

**Author:** ![HWP](https://avatars.discourse-cdn.com/v4/letter/h/ac8455/32.png) [@HWP](https://community.ecumaster.com/u/HWP)\
**Post date:** [March 20, 2025, 2:56pm UTC](https://community.ecumaster.com/t/afr-value-instead-of-lamda/1983/4 "2025-03-20T14:56:54Z")

</div>

Hi,

I’ve just tried this to get an AFR gauge working, previously pulling from ecu.AFR, and upon pressing OK after completing the table it comes up with the “too much data…1008 bytes” warning.

Is this ok?

edit. When it comes to displaying it on a gauge on the ADU, will I need to create a number/conversion or will the table posted previously in this thread handle that itself?

Thank you 🙂

---

<div class="post-metadata">

**Author:** ![mkuklis\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/mkuklis_ecumaster/32/104_2.png) [@mkuklis\_ECUMASTER](https://community.ecumaster.com/u/mkuklis_ECUMASTER)\
**Post date:** [March 20, 2025, 3:15pm UTC](https://community.ecumaster.com/t/afr-value-instead-of-lamda/1983/5 "2025-03-20T15:15:50Z")

</div>

> [@HWP](#):
>
> it comes up with the “too much data…1008 bytes” warning.

You are logging too much data.  
You need to lower the frequency or disable some channels.  
You can do it in the “Logged channels” panel (press F8).

> [@HWP](#):
>
> When it comes to displaying it on a gauge on the ADU, will I need to create a number/conversion or will the table posted previously in this thread handle that itself?

The table alone is enough.  
You use the value from the table as the AFR channel.