# Anyone available for remote tuning?

**URL:** <https://community.ecumaster.com/t/anyone-available-for-remote-tuning/3593>\
**Category:** EMU BLACK / CLASSIC\
**Created:** [April 28, 2025, 7:22pm UTC](https://community.ecumaster.com/t/anyone-available-for-remote-tuning/3593 "2025-04-28T19:22:44Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mesumrn](https://avatars.discourse-cdn.com/v4/letter/m/85f322/32.png) [@Mesumrn](https://community.ecumaster.com/u/Mesumrn)\
**Post date:** [April 28, 2025, 7:22pm UTC](https://community.ecumaster.com/t/anyone-available-for-remote-tuning/3593/1 "2025-04-28T19:22:44Z")

</div>

Ive got a mk4 vr6 turbo 4motion, it is running on a base map currently and i can drive it up and down the road, however i am on quite a tight schedule to get the car “ready” and i cannot get a dyno slot in time (i started trying to book a slot over a month ago). By this i mean i want the boost mapped in just on spring pressure and get the car to a stage where it’s comfortable going through the revs. Ive still got around 2 and a half weeks till i need the car ready so let me know if anyone can help me out. Here are the mods:

Golf r32 bfh pnp emu black  
forged rods  
Headspacer 8.5:1 compression (estimated)  
GTX3582R (china turbo)  
Siemens deka 630cc injectors  
4 bar fuel pressure regulator  
Deatschwerks DW65v fuel pump  
Golf r32 throttle body  
MAC valve boost controller fitted  
IAT sensor fitted  
MAP sensor fitted (BOSCH 0 261 230 120)  
TIAL 44mm wastegate 0.5 bar spring in currently  
Standard lambda sensors  
3” downpipe  
2.5” intercooler piping  
SPEC stage 3 clutch with lightweight flywheel  
standard coilpacks  
standard sparkplugs can swap these to NGK DCPR9EIX

---

<div class="post-metadata">

**Author:** ![Benrebuilds](https://avatars.discourse-cdn.com/v4/letter/b/5f9b8f/32.png) [@Benrebuilds](https://community.ecumaster.com/u/Benrebuilds)\
**Post date:** [April 29, 2025, 1:12pm UTC](https://community.ecumaster.com/t/anyone-available-for-remote-tuning/3593/2 "2025-04-29T13:12:46Z")

</div>

Drop me a private message I can put you in touch with someone. I’ll message him now to check he can do it and get his number for you.

---

<div class="post-metadata">

**Author:** ![Benrebuilds](https://avatars.discourse-cdn.com/v4/letter/b/5f9b8f/32.png) [@Benrebuilds](https://community.ecumaster.com/u/Benrebuilds)\
**Post date:** [April 29, 2025, 4:45pm UTC](https://community.ecumaster.com/t/anyone-available-for-remote-tuning/3593/4 "2025-04-29T16:45:11Z")

</div>

This guy is who I was going to recommended  
Not sure why the post was deleted

---

<div class="post-metadata">

**Author:** ![Matts13](https://avatars.discourse-cdn.com/v4/letter/m/a87d85/32.png) [@Matts13](https://community.ecumaster.com/u/Matts13)\
**Post date:** [January 25, 2026, 2:28pm UTC](https://community.ecumaster.com/t/anyone-available-for-remote-tuning/3593/6 "2026-01-25T14:28:25Z")

</div>

Hi I have s13 with a ca18det engine running ecu master black. Do you know any remote tuners. Any help.would be appreciated. Thanks
