# Audi 18t bam DBW\_TPS\_PPS V3 0.48

**URL:** <https://community.ecumaster.com/t/audi-18t-bam-dbw-tps-pps-v3-0-48/3653>\
**Category:** V3 SOFTWARE\
**Created:** [May 7, 2025, 12:34pm UTC](https://community.ecumaster.com/t/audi-18t-bam-dbw-tps-pps-v3-0-48/3653 "2025-05-07T12:34:04Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![johanvs](https://avatars.discourse-cdn.com/v4/letter/j/ac8455/32.png) [@johanvs](https://community.ecumaster.com/u/johanvs)\
**Post date:** [May 7, 2025, 12:34pm UTC](https://community.ecumaster.com/t/audi-18t-bam-dbw-tps-pps-v3-0-48/3653/1 "2025-05-07T12:34:04Z")

</div>

Guys need help can someone look at my file .Car idle and drives perfect but coming to a stand still the car dies. I looked at all possable values .Clearly i am doing something wrong  
Is it normal for the DBW dc out to drop that far ?

[20250507\_1411.emublog3](https://community.ecumaster.com/uploads/short-url/olpo1LpG2h0tIQlylK15IcnoVwI.emublog3) (38.2 KB)  
[DBW.emub3](https://community.ecumaster.com/uploads/short-url/nAXqshIVlnKXl5rQ0JsUuFOSJrK.emub3) (67.0 KB)

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/8/87f3326e37c8ea5549819205a4d022dfc908e7e6.png)

---

<div class="post-metadata">

**Author:** ![johanvs](https://avatars.discourse-cdn.com/v4/letter/j/ac8455/32.png) [@johanvs](https://community.ecumaster.com/u/johanvs)\
**Post date:** [May 10, 2025, 3:46am UTC](https://community.ecumaster.com/t/audi-18t-bam-dbw-tps-pps-v3-0-48/3653/2 "2025-05-10T03:46:34Z")

</div>

**Just an update:**  
The issue was related to the IDLE airflow system settings. I disabled the actuator and increased the idle speed to 950 RPM — the engine no longer stalled after that. I then re-enabled the actuator and checked the arm state airflow table. After adjusting both the idle settings and the table values, the stalling issue has been resolved.

---

<div class="post-metadata">

**Author:** ![Jorso](https://avatars.discourse-cdn.com/v4/letter/j/e9bcb4/32.png) [@Jorso](https://community.ecumaster.com/u/Jorso)\
**Post date:** [May 18, 2025, 5:15pm UTC](https://community.ecumaster.com/t/audi-18t-bam-dbw-tps-pps-v3-0-48/3653/3 "2025-05-18T17:15:14Z")

</div>

Hey, Im having similar issues with the engine stalling when goming into stop, could you share your map with the new settings which is working for you?

---

<div class="post-metadata">

**Author:** ![johanvs](https://avatars.discourse-cdn.com/v4/letter/j/ac8455/32.png) [@johanvs](https://community.ecumaster.com/u/johanvs)\
**Post date:** [June 18, 2025, 4:54am UTC](https://community.ecumaster.com/t/audi-18t-bam-dbw-tps-pps-v3-0-48/3653/4 "2025-06-18T04:54:00Z")

</div>

Sorry bud only seeing this now ,  
[EMu black to upload 28\_05\_2025.emub3](https://community.ecumaster.com/uploads/short-url/lMElqobbAywejhLW4gOjXpXlHE9.emub3) (66.9 KB)

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/7/7be9832479c2863ed6f52d9e9b9feefce38932fb.png)