# Autotune - not work on VE table 2

**URL:** <https://community.ecumaster.com/t/autotune-not-work-on-ve-table-2/3696>\
**Category:** V3 SOFTWARE\
**Created:** [May 14, 2025, 9:33am UTC](https://community.ecumaster.com/t/autotune-not-work-on-ve-table-2/3696 "2025-05-14T09:33:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mlynek](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/mlynek/32/3773_2.png) [@Mlynek](https://community.ecumaster.com/u/Mlynek)\
**Post date:** [May 14, 2025, 9:33am UTC](https://community.ecumaster.com/t/autotune-not-work-on-ve-table-2/3696/1 "2025-05-14T09:33:29Z")

</div>

Autotune  
If I select ve table =2 the ve values in the autotune - proposed ve table look like they are taken from ve table 2 but the y axis is as in ve table 1  
When I want to apply changes from the proposed ve table they are always applied to ve table 1 instead of ve table 2

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/e/ef07f094299ed63d8045cfd3ad0d03c72f757718.jpeg)

---

<div class="post-metadata">

**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\
**Post date:** [May 14, 2025, 2:50pm UTC](https://community.ecumaster.com/t/autotune-not-work-on-ve-table-2/3696/2 "2025-05-14T14:50:43Z")

</div>

I will check and fix it