# BARO reads same as MAP when using external MAP sensor

**URL:** <https://community.ecumaster.com/t/baro-reads-same-as-map-when-using-external-map-sensor/2716>\
**Category:** V3 SOFTWARE\
**Created:** [November 7, 2024, 9:12pm UTC](https://community.ecumaster.com/t/baro-reads-same-as-map-when-using-external-map-sensor/2716 "2024-11-07T21:12:10Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![SteveDawson](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@SteveDawson](https://community.ecumaster.com/u/SteveDawson)\
**Post date:** [November 7, 2024, 9:12pm UTC](https://community.ecumaster.com/t/baro-reads-same-as-map-when-using-external-map-sensor/2716/1 "2024-11-07T21:12:10Z")

</div>

I have a dedicated sensor to measure MAP and configured the internal sensor to measure BARO. The log shows BARO = MAP. I expected BARO to have a fixed value around 100 kPa. There is nothing physically connected to the built in pressure sensor on the EMU Black.

I’m running V3, client version 3.037 Exp. 1

 ![2024-11-07 (6)](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/1/13a584c27a78c5ed9913b2ee84679762939195ce.png)

---

<div class="post-metadata">

**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\
**Post date:** [November 7, 2024, 9:32pm UTC](https://community.ecumaster.com/t/baro-reads-same-as-map-when-using-external-map-sensor/2716/2 "2024-11-07T21:32:28Z")

</div>

Just to confirm, donyoubuse 3.039 version ?

---

<div class="post-metadata">

**Author:** ![SteveDawson](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@SteveDawson](https://community.ecumaster.com/u/SteveDawson)\
**Post date:** [November 7, 2024, 10:21pm UTC](https://community.ecumaster.com/t/baro-reads-same-as-map-when-using-external-map-sensor/2716/3 "2024-11-07T22:21:40Z")

</div>

The log chart shown above was made with 3.037

After your suggestion, I downloaded 3.039 client software. I will log BARO and MAP and post the results here.

Thanks

---

<div class="post-metadata">

**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\
**Post date:** [November 8, 2024, 1:22pm UTC](https://community.ecumaster.com/t/baro-reads-same-as-map-when-using-external-map-sensor/2716/4 "2024-11-08T13:22:31Z")

</div>

This bug exists in all version. It will be fixed for 3.040

---

<div class="post-metadata">

**Author:** ![SteveDawson](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@SteveDawson](https://community.ecumaster.com/u/SteveDawson)\
**Post date:** [November 8, 2024, 2:25pm UTC](https://community.ecumaster.com/t/baro-reads-same-as-map-when-using-external-map-sensor/2716/5 "2024-11-08T14:25:16Z")

</div>

I see. Thanks for the quick response. Looking forward to 3.040.

I’m using Alpha-N fueling, but “Enable baro correction” is unchecked and table “Barometric corr.” is all zeros so I am not currently affected by this. I will enter settings for these after the 3.040 upgrade.

---

<div class="post-metadata">

**Author:** ![SteveDawson](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@SteveDawson](https://community.ecumaster.com/u/SteveDawson)\
**Post date:** [December 16, 2024, 6:56pm UTC](https://community.ecumaster.com/t/baro-reads-same-as-map-when-using-external-map-sensor/2716/6 "2024-12-16T18:56:42Z")

</div>

I’m still seeing BARO = MAP in 3.041

They don’t match exactly, but I would expect BARO to be steady near 100 since I’m using an external MAP sensor and reading atmospheric pressure with the internal sensor.

Magnified view:

 ![2024-12-16 (2)](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/9/9c2fe211720d115a4a5efaadb04aa7b7a9b73bb8.png)

---

<div class="post-metadata">

**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\
**Post date:** [December 16, 2024, 7:31pm UTC](https://community.ecumaster.com/t/baro-reads-same-as-map-when-using-external-map-sensor/2716/7 "2024-12-16T19:31:13Z")

</div>

Could you show me your MAP sensor settings ?

---

<div class="post-metadata">

**Author:** ![SteveDawson](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@SteveDawson](https://community.ecumaster.com/u/SteveDawson)\
**Post date:** [December 16, 2024, 10:39pm UTC](https://community.ecumaster.com/t/baro-reads-same-as-map-when-using-external-map-sensor/2716/8 "2024-12-16T22:39:52Z")

</div>

![2024-12-16 (3)](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/1/17496bb116bf2961840567fc50f3d5b745644031.png)

---

<div class="post-metadata">

**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\
**Post date:** [December 23, 2024, 11:18pm UTC](https://community.ecumaster.com/t/baro-reads-same-as-map-when-using-external-map-sensor/2716/9 "2024-12-23T23:18:25Z")

</div>

This bug was already fixed and works for sure in firmware 3.040 and newer

---

<div class="post-metadata">

**Author:** ![SteveDawson](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@SteveDawson](https://community.ecumaster.com/u/SteveDawson)\
**Post date:** [December 24, 2024, 6:58pm UTC](https://community.ecumaster.com/t/baro-reads-same-as-map-when-using-external-map-sensor/2716/10 "2024-12-24T18:58:48Z")

</div>

Is there anything wrong with my MAP, BARO parameters?  
Is there another setting I need to fix?

---

<div class="post-metadata">

**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\
**Post date:** [December 24, 2024, 9:11pm UTC](https://community.ecumaster.com/t/baro-reads-same-as-map-when-using-external-map-sensor/2716/11 "2024-12-24T21:11:36Z")

</div>

Please upgrade firmware to 3.042 and test.  
If it doesnt work then I will need your project, as your MAP sensor settings work for me correctly.
