# BARO shows same value as external MAP sensor

**URL:** <https://community.ecumaster.com/t/baro-shows-same-value-as-external-map-sensor/2708>\
**Category:** GENERAL\
**Created:** [November 7, 2024, 11:42am UTC](https://community.ecumaster.com/t/baro-shows-same-value-as-external-map-sensor/2708 "2024-11-07T11:42:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![SteveDawson](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@SteveDawson](https://community.ecumaster.com/u/SteveDawson)\
**Post date:** [November 7, 2024, 11:42am UTC](https://community.ecumaster.com/t/baro-shows-same-value-as-external-map-sensor/2708/1 "2024-11-07T11:42:51Z")

</div>

I have a dedicated sensor to measure MAP and configured the internal sensor to measure BARO. The log shows BARO = MAP. I expected BARO to have a fixed value around 100 kPa. There is nothing physically connected to the built in pressure sensor on the EMU Black.

I’m running V3, client version 3.037 Exp. 1

 ![2024-11-07 (6)](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/1/13a584c27a78c5ed9913b2ee84679762939195ce.png)

---

<div class="post-metadata">

**Author:** ![Matthew121](https://avatars.discourse-cdn.com/v4/letter/m/f08c70/32.png) [@Matthew121](https://community.ecumaster.com/u/Matthew121)\
**Post date:** [November 7, 2024, 7:34pm UTC](https://community.ecumaster.com/t/baro-shows-same-value-as-external-map-sensor/2708/2 "2024-11-07T19:34:01Z")

</div>

You might want to post this in the v3 group

---

<div class="post-metadata">

**Author:** ![SteveDawson](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@SteveDawson](https://community.ecumaster.com/u/SteveDawson)\
**Post date:** [November 7, 2024, 9:07pm UTC](https://community.ecumaster.com/t/baro-shows-same-value-as-external-map-sensor/2708/3 "2024-11-07T21:07:39Z")

</div>

Will do. Thanks for the suggestion.