# Bike ITB with DBW - EMU Black

**URL:** <https://community.ecumaster.com/t/bike-itb-with-dbw-emu-black/1708>\
**Category:** EMU BLACK / CLASSIC\
**Created:** [June 28, 2024, 8:37am UTC](https://community.ecumaster.com/t/bike-itb-with-dbw-emu-black/1708 "2024-06-28T08:37:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![BenMini](https://avatars.discourse-cdn.com/v4/letter/b/7ba0ec/32.png) [@BenMini](https://community.ecumaster.com/u/BenMini)\
**Post date:** [June 28, 2024, 8:37am UTC](https://community.ecumaster.com/t/bike-itb-with-dbw-emu-black/1708/1 "2024-06-28T08:37:39Z")

</div>

Good Morning All,

Curently in the process of installing a EMU Black into my 1982 mini, with C20XE and ITB.

As my ECU can do DBW, I’ve been looking into bikes that come with DBW ITB’s (2021 GSX-S1000, 2014 BMW S1000R as examples). What information will i need to locate in order to ensure compatibility with the EMU Black that will be controlling them.

Any pit falls i need to look out for PID information etc?

Kind Regards,

Ben

---

<div class="post-metadata">

**Author:** ![razzor13bt](https://avatars.discourse-cdn.com/v4/letter/r/ecae2f/32.png) [@razzor13bt](https://community.ecumaster.com/u/razzor13bt)\
**Post date:** [June 29, 2024, 1:36pm UTC](https://community.ecumaster.com/t/bike-itb-with-dbw-emu-black/1708/2 "2024-06-29T13:36:27Z")

</div>

Have seen guys using the BMW E46 s54 M3 throttle actuator on itb projects with success.  
The actuator connects to the itb linkage.

---

<div class="post-metadata">

**Author:** ![Wired](https://avatars.discourse-cdn.com/v4/letter/w/53a042/32.png) [@Wired](https://community.ecumaster.com/u/Wired)\
**Post date:** [July 3, 2024, 9:33pm UTC](https://community.ecumaster.com/t/bike-itb-with-dbw-emu-black/1708/3 "2024-07-03T21:33:42Z")

</div>

Have done Gen3 Hayabusa on Black, and although not what you are after, KTM1290 Superduke. I think most would work

---

<div class="post-metadata">

**Author:** ![BenMini](https://avatars.discourse-cdn.com/v4/letter/b/7ba0ec/32.png) [@BenMini](https://community.ecumaster.com/u/BenMini)\
**Post date:** [July 4, 2024, 8:44am UTC](https://community.ecumaster.com/t/bike-itb-with-dbw-emu-black/1708/4 "2024-07-04T08:44:26Z")

</div>

Thank you for confirming!

I have found a pin out & service manual with the expected voltages etc for the GSX-S and that suggested it would work. But your confirmation is worth its weight in gold.

Kind Regards,

Ben

---

<div class="post-metadata">

**Author:** ![BenMini](https://avatars.discourse-cdn.com/v4/letter/b/7ba0ec/32.png) [@BenMini](https://community.ecumaster.com/u/BenMini)\
**Post date:** [July 4, 2024, 8:46am UTC](https://community.ecumaster.com/t/bike-itb-with-dbw-emu-black/1708/5 "2024-07-04T08:46:45Z")

</div>

i did consider using a separate motor on my existing ITB, but I can get a full ITB set up for \<£200 with all sensors, actuators, injectors on it. Ive not found the separate motors anywhere near that cheap!