# Bmw b58 electronic wg actuator

**URL:** <https://community.ecumaster.com/t/bmw-b58-electronic-wg-actuator/3301>\
**Category:** EMU PRO\
**Created:** [March 5, 2025, 10:18am UTC](https://community.ecumaster.com/t/bmw-b58-electronic-wg-actuator/3301 "2025-03-05T10:18:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![gtengines](https://avatars.discourse-cdn.com/v4/letter/g/8dc957/32.png) [@gtengines](https://community.ecumaster.com/u/gtengines)\
**Post date:** [March 5, 2025, 10:18am UTC](https://community.ecumaster.com/t/bmw-b58-electronic-wg-actuator/3301/1 "2025-03-05T10:18:39Z")

</div>

![1907431_x800](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/a/a3f8a4662c1aece2b67c08dad8a16a7b9d53cf8d.webp)

Looking for any information how to connect this type of electronic WG actuator on EMU PRO, Someone was already done this?

---

<div class="post-metadata">

**Author:** ![kimbaku](https://avatars.discourse-cdn.com/v4/letter/k/8edcca/32.png) [@kimbaku](https://community.ecumaster.com/u/kimbaku)\
**Post date:** [March 6, 2025, 9:23pm UTC](https://community.ecumaster.com/t/bmw-b58-electronic-wg-actuator/3301/2 "2025-03-06T21:23:53Z")

</div>

Does it have 5 pins? Looks like mitsubishi ewg

---

<div class="post-metadata">

**Author:** ![Louis](https://avatars.discourse-cdn.com/v4/letter/l/ecb155/32.png) [@Louis](https://community.ecumaster.com/u/Louis)\
**Post date:** [March 14, 2025, 1:32pm UTC](https://community.ecumaster.com/t/bmw-b58-electronic-wg-actuator/3301/3 "2025-03-14T13:32:28Z")

</div>

5pin h-bridge and sensor  
pin  
1)motor+  
2)sensor 5v ref  
3)sensor gnd  
4)sensor signal  
5)motor-

---

<div class="post-metadata">

**Author:** ![gtengines](https://avatars.discourse-cdn.com/v4/letter/g/8dc957/32.png) [@gtengines](https://community.ecumaster.com/u/gtengines)\
**Post date:** [March 14, 2025, 3:17pm UTC](https://community.ecumaster.com/t/bmw-b58-electronic-wg-actuator/3301/4 "2025-03-14T15:17:59Z")

</div>

Have you ever use it? How it works? How much current take? One h-bridge output will be enought?

---

<div class="post-metadata">

**Author:** ![Louis](https://avatars.discourse-cdn.com/v4/letter/l/ecb155/32.png) [@Louis](https://community.ecumaster.com/u/Louis)\
**Post date:** [March 15, 2025, 8:56am UTC](https://community.ecumaster.com/t/bmw-b58-electronic-wg-actuator/3301/5 "2025-03-15T08:56:30Z")

</div>

I used it, but not with Emu Pro yet.  
Emu Pro supports electronic wastegate control.  
It is pretty straightforward—just an H-bridge DC motor and a linear position sensor.  
As far as I remember, the current is less than 3A