# BMW S54 Trigger Settings

**URL:** <https://community.ecumaster.com/t/bmw-s54-trigger-settings/1791>\
**Category:** V3 SOFTWARE\
**Created:** [July 9, 2024, 8:03pm UTC](https://community.ecumaster.com/t/bmw-s54-trigger-settings/1791 "2024-07-09T20:03:23Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![efitune](https://avatars.discourse-cdn.com/v4/letter/e/c37758/32.png) [@efitune](https://community.ecumaster.com/u/efitune)\
**Post date:** [July 9, 2024, 8:03pm UTC](https://community.ecumaster.com/t/bmw-s54-trigger-settings/1791/1 "2024-07-09T20:03:23Z")

</div>

Hi All,

Just moving over all the calibration from V2 to V3.

for the S54 BMW engine, on V2 i have Cam 1 as Missing Tooth and Cam 2 as BMW multitooth. Both of these aren’t available in the current V3 software. Any suggestions?

Thanks

---

<div class="post-metadata">

**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\
**Post date:** [July 9, 2024, 8:38pm UTC](https://community.ecumaster.com/t/bmw-s54-trigger-settings/1791/2 "2024-07-09T20:38:32Z")

</div>

Missing tooth is N-1 now.

Set it up and then make a scope. I will advise then how to set CAM #2

---

<div class="post-metadata">

**Author:** ![efitune](https://avatars.discourse-cdn.com/v4/letter/e/c37758/32.png) [@efitune](https://community.ecumaster.com/u/efitune)\
**Post date:** [July 9, 2024, 9:01pm UTC](https://community.ecumaster.com/t/bmw-s54-trigger-settings/1791/3 "2024-07-09T21:01:13Z")

</div>

Great, thanks.

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/c/ce1e85f8b8ad0b79a99f1a3517470114bf8f7367.png)  
[scope\_202479\_220.emubscp3](https://community.ecumaster.com/uploads/short-url/cvX8CqD7r8Ovtg448NHgNluY1U4.emubscp3) (643 Bytes)

---

<div class="post-metadata">

**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\
**Post date:** [July 9, 2024, 9:53pm UTC](https://community.ecumaster.com/t/bmw-s54-trigger-settings/1791/4 "2024-07-09T21:53:30Z")

</div>

![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/a/ac6316d8e20fe7caf0132287b5452901e154e0ca.png)