# Bosch 4 pin pedal **URL:** \ **Category:** EMU BLACK / CLASSIC\ **Created:** [March 15, 2024, 12:37am UTC](https://community.ecumaster.com/t/bosch-4-pin-pedal/886 "2024-03-15T00:37:59Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![AntonioSilva](https://avatars.discourse-cdn.com/v4/letter/a/6a8cbe/32.png) [@AntonioSilva](https://community.ecumaster.com/u/AntonioSilva)\ **Post date:** [March 15, 2024, 12:37am UTC](https://community.ecumaster.com/t/bosch-4-pin-pedal/886/1 "2024-03-15T00:37:59Z")
Hi, i have a Peugeot 206 RC and im wiring emu black on it. Im having trouble with the accelerator pedal with only 4 wires, this is common pedal on many Peugeot, so i have this pinout: 1- sensor 1 2- gnd 3- sensor 2 4- 5v But it does not output on sensor 1 and 2 0-5v or 0-3v. Currently car is working with renault pedal (6 pin) but cannot fit it in place. Are these Peugeot pedal any different? ![IMG_20240314_232637](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/1X/42f27727ef0a7dacba4b3bbab91481130e3cd5a7.jpeg) ---
**Author:** ![mkuklis\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/mkuklis_ecumaster/32/104_2.png) [@mkuklis\_ECUMASTER](https://community.ecumaster.com/u/mkuklis_ECUMASTER)\ **Post date:** [March 15, 2024, 1:05pm UTC](https://community.ecumaster.com/t/bosch-4-pin-pedal/886/2 "2024-03-15T13:05:37Z")
If you connected 5 V and ground, and you don’t see any signal change it’s either wrong pinout or broken pedal. ---
**Author:** ![AntonioSilva](https://avatars.discourse-cdn.com/v4/letter/a/6a8cbe/32.png) [@AntonioSilva](https://community.ecumaster.com/u/AntonioSilva)\ **Post date:** [March 15, 2024, 1:19pm UTC](https://community.ecumaster.com/t/bosch-4-pin-pedal/886/3 "2024-03-15T13:19:49Z")
Just figured after trying a 6 pin Peugeot pedal and other 2 pedals. Output is a digital signal, it has a tle4921u hall sensor inside and outputs a digital signal. Changing to a vw bosch pedal. Tanks.