# Clutch position via CAN

**URL:** <https://community.ecumaster.com/t/clutch-position-via-can/1727>\
**Category:** EMU PRO\
**Created:** [July 1, 2024, 7:45pm UTC](https://community.ecumaster.com/t/clutch-position-via-can/1727 "2024-07-01T19:45:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![derUltraTT](https://avatars.discourse-cdn.com/v4/letter/d/ba8739/32.png) [@derUltraTT](https://community.ecumaster.com/u/derUltraTT)\
**Post date:** [July 1, 2024, 7:45pm UTC](https://community.ecumaster.com/t/clutch-position-via-can/1727/1 "2024-07-01T19:45:35Z")

</div>

Hi  
i am useing a PRO8 and pull clutch position via CAN with following settings:

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/b/ba4e38f2eac0c0add117f0279ab750f97cbc4c52.png)  
The CAN variable works fine, but the EMU seems not to accept the CAN value and the EMU clutch position always stays at 0 and the state is not calculated according the given borders:  
 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/e/e115561ab563ed29388a64e793cc1c2345b0d449.png)  
Do i do something wrong or is this a bug?

---

<div class="post-metadata">

**Author:** ![mkuklis\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/mkuklis_ecumaster/32/104_2.png) [@mkuklis\_ECUMASTER](https://community.ecumaster.com/u/mkuklis_ECUMASTER)\
**Post date:** [July 2, 2024, 9:50am UTC](https://community.ecumaster.com/t/clutch-position-via-can/1727/2 "2024-07-02T09:50:19Z")

</div>

Hi,  
Yes, it’s a bug. I confirmed it on the bench.  
We will fix it for the next release. Thanks for the feedback.

In the meantime, you can use a custom voltage channel that works as intended. You can convert your clutch position to voltage in the project tree and convert it back in the sensor configuration.