# Custom input sensor definition

**URL:** <https://community.ecumaster.com/t/custom-input-sensor-definition/914>\
**Category:** EMU PRO\
**Created:** [March 21, 2024, 9:41am UTC](https://community.ecumaster.com/t/custom-input-sensor-definition/914 "2024-03-21T09:41:36Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![piozz](https://avatars.discourse-cdn.com/v4/letter/p/ea666f/32.png) [@piozz](https://community.ecumaster.com/u/piozz)\
**Post date:** [March 21, 2024, 9:41am UTC](https://community.ecumaster.com/t/custom-input-sensor-definition/914/1 "2024-03-21T09:41:36Z")

</div>

Hi,  
Still a complete newbie in the EMU world.  
It seems to me the software does not allow to define a custom input sensor in terms of assigning a custom name.  
I’m looking for probing the intecooling water temperature and, since there is no specific preset field for that, I would need to use something else and remember the name.  
It would be a nice software feature to have

---

<div class="post-metadata">

**Author:** ![mkowalik\_ECUMASTER](https://avatars.discourse-cdn.com/v4/letter/m/839c29/32.png) [@mkowalik\_ECUMASTER](https://community.ecumaster.com/u/mkowalik_ECUMASTER)\
**Post date:** [April 2, 2024, 9:06am UTC](https://community.ecumaster.com/t/custom-input-sensor-definition/914/2 "2024-04-02T09:06:07Z")

</div>

Define a custom table in the project tree using the ‘Resources Analog X Voltage’ channel for X-axis. Name your table as you wish. It will be your calibration table

To change pull-resistor, assign (just for a configuration purpose) the chosen input to whatever sensor, change the pull-setting and then unassign it. Pull-setting will be remembered.

This solution is not ideal (you cannot define voltage filtering for example) but it should do the job.