# DBW settings for a Black PNP BAM

**URL:** <https://community.ecumaster.com/t/dbw-settings-for-a-black-pnp-bam/5658>\
**Category:** GENERAL\
**Created:** [April 24, 2026, 8:45pm UTC](https://community.ecumaster.com/t/dbw-settings-for-a-black-pnp-bam/5658 "2026-04-24T20:45:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![denys-golf-mk2-1.8-20vt](https://avatars.discourse-cdn.com/v4/letter/d/46a35a/32.png) [@denys-golf-mk2-1.8-20vt](https://community.ecumaster.com/u/denys-golf-mk2-1.8-20vt)\
**Post date:** [April 24, 2026, 8:45pm UTC](https://community.ecumaster.com/t/dbw-settings-for-a-black-pnp-bam/5658/1 "2026-04-24T20:45:25Z")

</div>

Can some one help me with getting the right settings for mij DBW throttle body?

I’m using V3 firmware

Calibrating the throttle body works but it doesn’t react to the throttle pedal.

---

<div class="post-metadata">

**Author:** ![ngt](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/ngt/32/1162_2.png) [@ngt](https://community.ecumaster.com/u/ngt)\
**Post date:** [April 26, 2026, 8:15pm UTC](https://community.ecumaster.com/t/dbw-settings-for-a-black-pnp-bam/5658/2 "2026-04-26T20:15:42Z")

</div>

Have you set your PPS as well ? DBW calibration is only for the engine DBW part. You need to set your Pedal (PPS) settings manually as well.