# DET 3 BMW e36 328

**URL:** <https://community.ecumaster.com/t/det-3-bmw-e36-328/3192>\
**Category:** OTHER DEVICES\
**Created:** [February 12, 2025, 10:27am UTC](https://community.ecumaster.com/t/det-3-bmw-e36-328/3192 "2025-02-12T10:27:51Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![KK\_Autoteknik](https://avatars.discourse-cdn.com/v4/letter/k/71e660/32.png) [@KK\_Autoteknik](https://community.ecumaster.com/u/KK_Autoteknik)\
**Post date:** [February 12, 2025, 10:27am UTC](https://community.ecumaster.com/t/det-3-bmw-e36-328/3192/1 "2025-02-12T10:27:51Z")

</div>

Hi Have any one have sucsees with DET 3 and Simens ms41.0 ?

I can’t get the crank tigger to work properly, I have a coulpe of times rpm signal on the DET 3 but not constant, and can’t rev passt 2700 rpm

I have scope image of crank trigger signal into the DET 3 and it is a perfekt looking hall signal, i have used the 12V pull up in the det3 and have made one for 5V 2700ohm, but no difference