# DET3 with honda D16A9 (obd0)

**URL:** <https://community.ecumaster.com/t/det3-with-honda-d16a9-obd0/571>\
**Category:** OTHER DEVICES\
**Created:** [January 7, 2024, 5:16pm UTC](https://community.ecumaster.com/t/det3-with-honda-d16a9-obd0/571 "2024-01-07T17:16:13Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Stef27](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@Stef27](https://community.ecumaster.com/u/Stef27)\
**Post date:** [January 7, 2024, 5:16pm UTC](https://community.ecumaster.com/t/det3-with-honda-d16a9-obd0/571/1 "2024-01-07T17:16:13Z")

</div>

hello  
i have rover 216 GTI with the honda D16A9.  
i would like to know if it’s possible to map this car with the DET3 ?

i want to turbo this engine,and i will need to map after that.

i don’t know (undesrtsand) anything with the electronic and with those many possibility and many ECU.

thanks

---

<div class="post-metadata">

**Author:** ![wireon](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/wireon/32/1031_2.png) [@wireon](https://community.ecumaster.com/u/wireon)\
**Post date:** [June 2, 2024, 2:41pm UTC](https://community.ecumaster.com/t/det3-with-honda-d16a9-obd0/571/2 "2024-06-02T14:41:42Z")

</div>

yes , its posible … whit the function MAF to MAP

---

<div class="post-metadata">

**Author:** ![Stef27](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@Stef27](https://community.ecumaster.com/u/Stef27)\
**Post date:** [June 2, 2024, 6:10pm UTC](https://community.ecumaster.com/t/det3-with-honda-d16a9-obd0/571/3 "2024-06-02T18:10:07Z")

</div>

ok thank you  
i don’t need to pass to obd0 to obd1 ?

beacause mon mine,i have obd0,and i would like to stay like that because parts to obd1 are expensive and rare

---

<div class="post-metadata">

**Author:** ![bruce\_lee](https://avatars.discourse-cdn.com/v4/letter/b/c5a1d2/32.png) [@bruce\_lee](https://community.ecumaster.com/u/bruce_lee)\
**Post date:** [June 3, 2024, 11:20am UTC](https://community.ecumaster.com/t/det3-with-honda-d16a9-obd0/571/4 "2024-06-03T11:20:12Z")

</div>

btw obd0 also can be chipped and tuned on software called turboedit you have guide on pgmfi forum

---

<div class="post-metadata">

**Author:** ![Stef27](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@Stef27](https://community.ecumaster.com/u/Stef27)\
**Post date:** [June 3, 2024, 12:41pm UTC](https://community.ecumaster.com/t/det3-with-honda-d16a9-obd0/571/5 "2024-06-03T12:41:22Z")

</div>

Hello  
so, once the turbo is installed, I take a DET3, make the connections as best I can and then use turboedit to adjust everything, is that it?

---

<div class="post-metadata">

**Author:** ![bruce\_lee](https://avatars.discourse-cdn.com/v4/letter/b/c5a1d2/32.png) [@bruce\_lee](https://community.ecumaster.com/u/bruce_lee)\
**Post date:** [June 3, 2024, 8:20pm UTC](https://community.ecumaster.com/t/det3-with-honda-d16a9-obd0/571/6 "2024-06-03T20:20:06Z")

</div>

you dont need det3, you can tune stock ecu with turboedit

---

<div class="post-metadata">

**Author:** ![Stef27](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@Stef27](https://community.ecumaster.com/u/Stef27)\
**Post date:** [June 5, 2024, 3:48pm UTC](https://community.ecumaster.com/t/det3-with-honda-d16a9-obd0/571/7 "2024-06-05T15:48:00Z")

</div>

ah ok  
but i thnik it’s easier with DET3.  
we can plug a PC with USB.  
and i think it’s quicker to set up,with the stock ecu,to write on the chip it’s looooonnnnng