# DSG start idle rpm drop

**URL:** <https://community.ecumaster.com/t/dsg-start-idle-rpm-drop/1373>\
**Category:** V3 SOFTWARE\
**Created:** [May 12, 2024, 7:48am UTC](https://community.ecumaster.com/t/dsg-start-idle-rpm-drop/1373 "2024-05-12T07:48:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![xsd](https://avatars.discourse-cdn.com/v4/letter/x/b5e925/32.png) [@xsd](https://community.ecumaster.com/u/xsd)\
**Post date:** [May 12, 2024, 7:48am UTC](https://community.ecumaster.com/t/dsg-start-idle-rpm-drop/1373/1 "2024-05-12T07:48:55Z")

</div>

Hey,

Sometimes I just want to roll a few meters and when I let off the brake foot the engine rpm drops about 300-400rpm down.

Is there a way to increase idle when I release the brake?

I have already set a different idle setpoint above 10km/h and more igniton in the ignition table are at this rpm.

You can see it also in the pictures:

 ![1234](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/1X/715351b4ee39d0b56e44b7cb91ebf4127737315e.png)  
 ![123](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/1X/0dfbfd7289c9e11b945cd04683c9b04d1cb3c600.png)

---

<div class="post-metadata">

**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\
**Post date:** [May 12, 2024, 12:55pm UTC](https://community.ecumaster.com/t/dsg-start-idle-rpm-drop/1373/2 "2024-05-12T12:55:53Z")

</div>

There is a air correcrion table in idle controll that increase the airflow based on dsg torque losses. (DSG airflow correction table)  
You need to qdjust this table.