# EGT Crimping terminal **URL:** \ **Category:** EMU BLACK / CLASSIC\ **Created:** [March 3, 2024, 7:41pm UTC](https://community.ecumaster.com/t/egt-crimping-terminal/820 "2024-03-03T19:41:56Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![matthew-95](https://avatars.discourse-cdn.com/v4/letter/m/ed8c4c/32.png) [@matthew-95](https://community.ecumaster.com/u/matthew-95)\ **Post date:** [March 3, 2024, 7:41pm UTC](https://community.ecumaster.com/t/egt-crimping-terminal/820/1 "2024-03-03T19:41:56Z")
Hi to all! I’m questioning about would be the correct way to connect an EGT probe to the EMU Classic. For practical choice I was thinking to use a normal copper 2 way connector to detach the probe from the harness, but is it a wrong choice because the cold junction calculated in the ecu? Or I need to crimp the terminals on the probe and insert directly in the ecu connector? ---
**Author:** ![SamiN](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/samin/32/208_2.png) [@SamiN](https://community.ecumaster.com/u/SamiN)\ **Post date:** [March 4, 2024, 6:41pm UTC](https://community.ecumaster.com/t/egt-crimping-terminal/820/2 "2024-03-04T18:41:18Z")
Split sensor wire and use k-type connectors like this. Do not use copper wire. ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/1X/1c8ee902e576b5a81691a167f5a6cf4e9e6de83d.jpeg) ---
**Author:** ![caddymaxi500](https://avatars.discourse-cdn.com/v4/letter/c/e8c25b/32.png) [@caddymaxi500](https://community.ecumaster.com/u/caddymaxi500)\ **Post date:** [March 5, 2024, 12:27pm UTC](https://community.ecumaster.com/t/egt-crimping-terminal/820/3 "2024-03-05T12:27:30Z")
ok, i have the same question. i have a 2 egt sensors from ecumaster: > **[EGT sensor](https://inter-rally.pl/product-eng-29959-EGT-sensor.html)** > > Check \[iai: product\_name\] \[iai: product\_version\_name\] in the Inter-Rally.pl store. A wide range of products for professionals and enthusiasts of motorsport and tuning. i have on my emu black EGT1 and EGT2. how to wire it? on the ends from the egt sensor cabel i put a connector like above? and than i run a egt extention cabel with the same type connector straight in the emu? > **[EGT cable (KX-PVC)](https://dp-engineering.nl/products/egt-cable-kx-pvc)** > > DP-Engineering is a quality shop for performance engine components and custom engine tuning solutions for any type of engine or car. and 1 cabel goes to ground and the other to a EGT input? or where to plug it in the emu? ---
**Author:** ![sven](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/sven/32/96_2.png) [@sven](https://community.ecumaster.com/u/sven)\ **Post date:** [March 5, 2024, 1:40pm UTC](https://community.ecumaster.com/t/egt-crimping-terminal/820/4 "2024-03-05T13:40:24Z")
This picture shows EMU Classic wiring diagram ![grafik](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/1X/0ef7be9f060aea1ee24adb4f35b4a7288835c88d.png) ---
**Author:** ![caddymaxi500](https://avatars.discourse-cdn.com/v4/letter/c/e8c25b/32.png) [@caddymaxi500](https://community.ecumaster.com/u/caddymaxi500)\ **Post date:** [March 5, 2024, 3:51pm UTC](https://community.ecumaster.com/t/egt-crimping-terminal/820/5 "2024-03-05T15:51:03Z")
ah ok, first i was confused becuase this is the pin numbers for a classic and not for a black. but i understand how to do it now. thanks. ---
**Author:** ![matthew-95](https://avatars.discourse-cdn.com/v4/letter/m/ed8c4c/32.png) [@matthew-95](https://community.ecumaster.com/u/matthew-95)\ **Post date:** [March 7, 2024, 11:27pm UTC](https://community.ecumaster.com/t/egt-crimping-terminal/820/6 "2024-03-07T23:27:03Z")
Just to be sure, you mean in this way? ![EMU EGT](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/1X/82132fb42ff932b5718865c51682fef01acc8f3b.png) ---
**Author:** ![matthew-95](https://avatars.discourse-cdn.com/v4/letter/m/ed8c4c/32.png) [@matthew-95](https://community.ecumaster.com/u/matthew-95)\ **Post date:** [July 27, 2025, 1:41pm UTC](https://community.ecumaster.com/t/egt-crimping-terminal/820/7 "2025-07-27T13:41:48Z")
I resume this topic because I’m not sure to have understood how to wire it phisically, and no one have answered my last post. Someone have some picture on how they wired the egt in emu connector?