# EJ20 Ign and Inj phase settings

**URL:** <https://community.ecumaster.com/t/ej20-ign-and-inj-phase-settings/1436>\
**Category:** EMU BLACK / CLASSIC\
**Created:** [May 18, 2024, 3:44pm UTC](https://community.ecumaster.com/t/ej20-ign-and-inj-phase-settings/1436 "2024-05-18T15:44:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![GMTune](https://avatars.discourse-cdn.com/v4/letter/g/8e7dd6/32.png) [@GMTune](https://community.ecumaster.com/u/GMTune)\
**Post date:** [May 18, 2024, 3:44pm UTC](https://community.ecumaster.com/t/ej20-ign-and-inj-phase-settings/1436/1 "2024-05-18T15:44:24Z")

</div>

EJ20 Subaru Injection and Ignition phase settings.  
Engine won’t start on any settings.  
CAS - 6 tooth  
CAM - 7 tooth

Firing order 1324  
Coils on plug - wired Coil1 - Cyl1, Coil2 - Cyl2 and etc…  
Injectors - wired Inj1 - Cyl1, Inj2 - Cyl2 and etc…

I’ve find that only on ignition offset 3 engine try to grab the fuel. But it won’t start.  
Ignition offset 2 - fires in exhaust.  
Ignition offset 1 - fires in intake.

More over, some how strobe light showed TDC mark spot on when I set ignition offset to 1.

Any help? I need settings for Ignition and Injector phase.  
Thank you.

Files attached in the drive.  
[Subaru 3G.emub](https://community.ecumaster.com/uploads/short-url/8aWFsitbeVhlVonbn6nTMi8e3ab.emub) (145.4 KB)

[https://drive.google.com/drive/folders/1ztKBX-V0msZgBegIc7iCxniNfbnAcgcv?usp=sharing](https://drive.google.com/drive/folders/1ztKBX-V0msZgBegIc7iCxniNfbnAcgcv?usp=sharing)

---

<div class="post-metadata">

**Author:** ![GMTune](https://avatars.discourse-cdn.com/v4/letter/g/8e7dd6/32.png) [@GMTune](https://community.ecumaster.com/u/GMTune)\
**Post date:** [May 19, 2024, 4:55am UTC](https://community.ecumaster.com/t/ej20-ign-and-inj-phase-settings/1436/2 "2024-05-19T04:55:13Z")

</div>

Solved!

Changed trigger to rising edge, and brupt and first try.

Closed case.