# Emu Black DBW and EWG

**URL:** <https://community.ecumaster.com/t/emu-black-dbw-and-ewg/3462>\
**Category:** EMU BLACK / CLASSIC\
**Created:** [April 2, 2025, 7:19pm UTC](https://community.ecumaster.com/t/emu-black-dbw-and-ewg/3462 "2025-04-02T19:19:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![VladPescaru](https://avatars.discourse-cdn.com/v4/letter/v/ecd19e/32.png) [@VladPescaru](https://community.ecumaster.com/u/VladPescaru)\
**Post date:** [April 2, 2025, 7:19pm UTC](https://community.ecumaster.com/t/emu-black-dbw-and-ewg/3462/1 "2025-04-02T19:19:16Z")

</div>

So, before buying the ewg, i want to make sure that the emu black can run both dbw and ewg… My hunch was no, as i only see one H Bridge on the pinout, but in the software, i can select both dbw and ewg without the outputs giving any conflicts…Cheers!

---

<div class="post-metadata">

**Author:** ![Mikebau5](https://avatars.discourse-cdn.com/v4/letter/m/c5a1d2/32.png) [@Mikebau5](https://community.ecumaster.com/u/Mikebau5)\
**Post date:** [April 2, 2025, 8:29pm UTC](https://community.ecumaster.com/t/emu-black-dbw-and-ewg/3462/2 "2025-04-02T20:29:49Z")

</div>

EMU Black has 2x Hbridge, so that’s fine.  
As per manual:

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/c/c6da380d50041274a4df34b491a66883b13c0c49.png)

---

<div class="post-metadata">

**Author:** ![derUltraTT](https://avatars.discourse-cdn.com/v4/letter/d/ba8739/32.png) [@derUltraTT](https://community.ecumaster.com/u/derUltraTT)\
**Post date:** [April 3, 2025, 8:42pm UTC](https://community.ecumaster.com/t/emu-black-dbw-and-ewg/3462/3 "2025-04-03T20:42:17Z")

</div>

I am useing dbw and ewg on a 1.8t without issues.