# Emu Black V3 DBW wiring/settings?

**URL:** <https://community.ecumaster.com/t/emu-black-v3-dbw-wiring-settings/3750>\
**Category:** GENERAL\
**Tags:** how-to\
**Created:** [May 22, 2025, 9:31am UTC](https://community.ecumaster.com/t/emu-black-v3-dbw-wiring-settings/3750 "2025-05-22T09:31:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Frankie](https://avatars.discourse-cdn.com/v4/letter/f/258eb7/32.png) [@Frankie](https://community.ecumaster.com/u/Frankie)\
**Post date:** [May 22, 2025, 9:31am UTC](https://community.ecumaster.com/t/emu-black-v3-dbw-wiring-settings/3750/1 "2025-05-22T09:31:38Z")

</div>

Hi,

Have wiring my DBW as on the Emu Black V2 wiring diagram, but it will not work. I have the V3 (3.047) software. Gets confusing what is TPS PPS-TPS etc.

Can any body tell me what is the correct wiring, shall i use TPS (B18) as one signaö to the PPS as shown in wiring example for V2?

Thanks,

---

<div class="post-metadata">

**Author:** ![Greg](https://avatars.discourse-cdn.com/v4/letter/g/71c47a/32.png) [@Greg](https://community.ecumaster.com/u/Greg)\
**Post date:** [May 22, 2025, 12:07pm UTC](https://community.ecumaster.com/t/emu-black-v3-dbw-wiring-settings/3750/2 "2025-05-22T12:07:58Z")

</div>

V3 will work with both wiring form v2 and v3 you jist need to assign correct input for pedal and throttle.