# EMU Classic CAN Dash and EDL1

**URL:** <https://community.ecumaster.com/t/emu-classic-can-dash-and-edl1/3023>\
**Category:** EMU BLACK / CLASSIC\
**Created:** [January 8, 2025, 7:45am UTC](https://community.ecumaster.com/t/emu-classic-can-dash-and-edl1/3023 "2025-01-08T07:45:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Driver02](https://avatars.discourse-cdn.com/v4/letter/d/e36b37/32.png) [@Driver02](https://community.ecumaster.com/u/Driver02)\
**Post date:** [January 8, 2025, 7:45am UTC](https://community.ecumaster.com/t/emu-classic-can-dash-and-edl1/3023/1 "2025-01-08T07:45:49Z")

</div>

Hi, for my build I would like to use a universal CAN Dash with my EMU Classic. However, therefore I need to specify the output of the Ext. port to “CAN-Bus”. Currently I use this port for a EDL 1. So it currently is specified as “Ecumaster serial logger”. If I now switch to CAN stream, this would most likely mean, that I couldn’t use my EDL 1 anymore.

Do you have any ideas of how to use a CAN dash and a logging device for engine parameters at the same time with EMU Classic or is there simply no workaround for this and I have to upgrade to EMU Black?

Thanks