# EMU Pro CAN Protocol
**URL:** https://community.ecumaster.com/t/emu-pro-can-protocol/656
**Category:** EMU PRO
**Created:** [January 24, 2024, 10:27am UTC](https://community.ecumaster.com/t/emu-pro-can-protocol/656 "2024-01-24T10:27:02Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@daniel](https://community.ecumaster.com/u/daniel)
#### Post date: [January 24, 2024, 10:27am UTC](https://community.ecumaster.com/t/emu-pro-can-protocol/656/1 "2024-01-24T10:27:02Z")
Hi! I’m currently working on my own digital dash. Right now it works with an EMU Black but I’d like to extend it’s code to support the EMU Pro. Is there going to be a detailed description of the standart EMU PRO CAN Protocol, or a .dbc file, to for example support it’s additional measuring channels?
Thanks!
---
### Author:  [@mkuklis\_ECUMASTER](https://community.ecumaster.com/u/mkuklis_ECUMASTER)
#### Post date: [January 24, 2024, 10:48am UTC](https://community.ecumaster.com/t/emu-pro-can-protocol/656/2 "2024-01-24T10:48:24Z")
Hi,
We will be adding a new CAN stream dedicated to EMU PRO, and when it happens, CANX and DBC files will be available. There is no timeline for it yet.
Currently, you can enable EMU Black stream in EMU PRO, and any additional values you need, you have to send with custom CAN export.
---
### Author:  [@sogarrd](https://community.ecumaster.com/u/sogarrd)
#### Post date: [January 29, 2025, 9:41am UTC](https://community.ecumaster.com/t/emu-pro-can-protocol/656/3 "2025-01-29T09:41:46Z")
Hi. is this sorted asking because I can’t seem to find it
---
### Author:  [@mkuklis\_ECUMASTER](https://community.ecumaster.com/u/mkuklis_ECUMASTER)
#### Post date: [January 29, 2025, 11:28am UTC](https://community.ecumaster.com/t/emu-pro-can-protocol/656/4 "2025-01-29T11:28:57Z")
Hi,
Not yet. We were busy with the DI.
However, since the most significant part of the DI development is done, we are returning to implementing everything that was put back because of it.
---
### Author:  [@kyle\_SunbeamDevelopments](https://community.ecumaster.com/u/kyle_SunbeamDevelopments)
#### Post date: [October 24, 2025, 8:39pm UTC](https://community.ecumaster.com/t/emu-pro-can-protocol/656/5 "2025-10-24T20:39:38Z")
Following up on this request. Is this available by any chance?