# Ford Fiesta MK7 **URL:** \ **Category:** V3 SOFTWARE\ **Created:** [June 7, 2024, 12:17pm UTC](https://community.ecumaster.com/t/ford-fiesta-mk7/1563 "2024-06-07T12:17:30Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![Werwolf25565](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/werwolf25565/32/611_2.png) [@Werwolf25565](https://community.ecumaster.com/u/Werwolf25565)\ **Post date:** [June 8, 2024, 6:18am UTC](https://community.ecumaster.com/t/ford-fiesta-mk7/1563/5 "2024-06-08T06:18:59Z")
Maybe my guide back than can help: it’s not perfect but it could get you forward. > [@1,8t AGU DBW setup problem](https://community.ecumaster.com/t/1-8t-agu-dbw-setup-problem/1185/36): > > Bosch 0 280 750 009: Ok. To get this thread closed I will post the summary, that was found with help of the different people above. Thank you very much. grinningStep 1: Get PPS (Pedal Position Sensor) Set up: Get these Windows and press and release Pedal to check the Analog Inputs. → If Voltages do not move as expected, you most probably have them connected the wrong way around. (So swap + and - at Pedal or somewhere. This was more Important in V2) Put your PPS 1 with respec… --- _[View the full topic](https://community.ecumaster.com/t/ford-fiesta-mk7/1563)._