# Fuel film per cylinder correction

**URL:** <https://community.ecumaster.com/t/fuel-film-per-cylinder-correction/2381>\
**Category:** EMU PRO\
**Created:** [September 25, 2024, 11:07pm UTC](https://community.ecumaster.com/t/fuel-film-per-cylinder-correction/2381 "2024-09-25T23:07:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![exvils](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/exvils/32/1921_2.png) [@exvils](https://community.ecumaster.com/u/exvils)\
**Post date:** [September 25, 2024, 11:07pm UTC](https://community.ecumaster.com/t/fuel-film-per-cylinder-correction/2381/1 "2024-09-25T23:07:18Z")

</div>

Hello,  
I am always getting more correction on cylinder nr. 2  
Disabling fuel film results in all pulse widths being equal, so problem is in fuel film calculation/strategy.  
random log, tune and pic in attachment. fw111.0, pro8

 ![fuel film cylinder 2 difference](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/c/c02f0d2ecd44e62a63e2578677437f1b04b0a32d.png)  
[EMUPRO\_rev18\_fuelfilm\_Q.emupro](https://community.ecumaster.com/uploads/short-url/dRcs0KFemTxGfMJSCWHRXZOvpOy.emupro) (29.5 KB)  
[2024\_0923\_2324\_711hp-2.emuprolog](https://community.ecumaster.com/uploads/short-url/45oSX9UiVH7FwKLJcu1TzrSpWXK.emuprolog) (1.5 MB)

---

<div class="post-metadata">

**Author:** ![mkuklis\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/mkuklis_ecumaster/32/104_2.png) [@mkuklis\_ECUMASTER](https://community.ecumaster.com/u/mkuklis_ECUMASTER)\
**Post date:** [September 26, 2024, 10:06am UTC](https://community.ecumaster.com/t/fuel-film-per-cylinder-correction/2381/2 "2024-09-26T10:06:22Z")

</div>

Ok, thanks for the report.  
We will look into this.