# GSXR1000 K6 Help needed

**URL:** <https://community.ecumaster.com/t/gsxr1000-k6-help-needed/1443>\
**Category:** EMU BLACK / CLASSIC\
**Created:** [May 20, 2024, 3:42am UTC](https://community.ecumaster.com/t/gsxr1000-k6-help-needed/1443 "2024-05-20T03:42:37Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![A.Dutsov](https://avatars.discourse-cdn.com/v4/letter/a/77aa72/32.png) [@A.Dutsov](https://community.ecumaster.com/u/A.Dutsov)\
**Post date:** [May 20, 2024, 3:42am UTC](https://community.ecumaster.com/t/gsxr1000-k6-help-needed/1443/1 "2024-05-20T03:42:37Z")

</div>

Need some help with wiring and setup, some trigger info, some info how to wire transmission position sensor to outupt gears etc. Also pneumatic shifter will be used, with button, but it uses 12v, can it be wired to cut while shift and whats the best way?

---

<div class="post-metadata">

**Author:** ![caddymaxi500](https://avatars.discourse-cdn.com/v4/letter/c/e8c25b/32.png) [@caddymaxi500](https://community.ecumaster.com/u/caddymaxi500)\
**Post date:** [May 25, 2024, 7:48pm UTC](https://community.ecumaster.com/t/gsxr1000-k6-help-needed/1443/2 "2024-05-25T19:48:25Z")

</div>

do you have a emu black?

---

<div class="post-metadata">

**Author:** ![A.Dutsov](https://avatars.discourse-cdn.com/v4/letter/a/77aa72/32.png) [@A.Dutsov](https://community.ecumaster.com/u/A.Dutsov)\
**Post date:** [May 25, 2024, 8:34pm UTC](https://community.ecumaster.com/t/gsxr1000-k6-help-needed/1443/3 "2024-05-25T20:34:02Z")

</div>

Yes black. Wiring of shifter sorted. Gear sensor also wired. If someone can help with something will be great.

---

<div class="post-metadata">

**Author:** ![caddymaxi500](https://avatars.discourse-cdn.com/v4/letter/c/e8c25b/32.png) [@caddymaxi500](https://community.ecumaster.com/u/caddymaxi500)\
**Post date:** [May 26, 2024, 12:11pm UTC](https://community.ecumaster.com/t/gsxr1000-k6-help-needed/1443/4 "2024-05-26T12:11:32Z")

</div>

gearbox sensor is under the table sensor setup, vss and gearbox.  
for the shifter you need a sensor and you can setup in gear cut under the table sport.