# Injector scope data

**URL:** <https://community.ecumaster.com/t/injector-scope-data/6010>\
**Category:** EMU BLACK / CLASSIC\
**Created:** [June 13, 2026, 9:22pm UTC](https://community.ecumaster.com/t/injector-scope-data/6010 "2026-06-13T21:22:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![TDJZS160](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/tdjzs160/32/6418_2.png) [@TDJZS160](https://community.ecumaster.com/u/TDJZS160)\
**Post date:** [June 13, 2026, 9:22pm UTC](https://community.ecumaster.com/t/injector-scope-data/6010/1 "2026-06-13T21:22:52Z")

</div>

Good evening all!

I was checking out my scope data after trying to do a COP conversion on my 2JZ. When checking the data I noticed my cylinder 4 injection end angle was around 120° different than all the rest. The rest are all within 2° of each other. Is this a symptom of a faulty injector or possibly its wiring?

---

<div class="post-metadata">

**Author:** ![noobtuner](https://avatars.discourse-cdn.com/v4/letter/n/e274bd/32.png) [@noobtuner](https://community.ecumaster.com/u/noobtuner)\
**Post date:** [June 14, 2026, 12:22am UTC](https://community.ecumaster.com/t/injector-scope-data/6010/2 "2026-06-14T00:22:28Z")

</div>

Mine is doing this too. @Jadzwin_ECUMASTER told me its a limitation of the scope display that they intend to solve in future iterations of the software.