# Logging data in PMU24DL

**URL:** <https://community.ecumaster.com/t/logging-data-in-pmu24dl/4581>\
**Category:** DATA MASTER\
**Created:** [October 14, 2025, 8:20am UTC](https://community.ecumaster.com/t/logging-data-in-pmu24dl/4581 "2025-10-14T08:20:50Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![leon36](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/leon36/32/3523_2.png) [@leon36](https://community.ecumaster.com/u/leon36)\
**Post date:** [October 14, 2025, 8:20am UTC](https://community.ecumaster.com/t/logging-data-in-pmu24dl/4581/1 "2025-10-14T08:20:50Z")

</div>

Hi, I was thinking of adding 4 suspension travel sensors into my build plan. The only place i have 4 spare analog inputs is into a PMU24DL. Would there be any issue logging these at 500hz in the PMU and syncing the data with ADU logs in Datamaster?

---

<div class="post-metadata">

**Author:** ![michal.kowalski](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/michal.kowalski/32/36_2.png) [@michal.kowalski](https://community.ecumaster.com/u/michal.kowalski)\
**Post date:** [October 14, 2025, 8:34am UTC](https://community.ecumaster.com/t/logging-data-in-pmu24dl/4581/2 "2025-10-14T08:34:39Z")

</div>

Unfortunately, there is no way of loading data from two devices at the same time.

---

<div class="post-metadata">

**Author:** ![leon36](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/leon36/32/3523_2.png) [@leon36](https://community.ecumaster.com/u/leon36)\
**Post date:** [October 14, 2025, 8:40am UTC](https://community.ecumaster.com/t/logging-data-in-pmu24dl/4581/3 "2025-10-14T08:40:36Z")

</div>

What would you suggest is the best way to do this?

---

<div class="post-metadata">

**Author:** ![leon36](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/leon36/32/3523_2.png) [@leon36](https://community.ecumaster.com/u/leon36)\
**Post date:** [October 14, 2025, 8:47am UTC](https://community.ecumaster.com/t/logging-data-in-pmu24dl/4581/4 "2025-10-14T08:47:15Z")

</div>

I could move 2 fuel level sensors, gearbox temp and oil accumulator pressure to the pmu and send that via CAN to the ADU. Then wire the suspension travel directly to the ADU.

---

<div class="post-metadata">

**Author:** ![michal.kowalski](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/michal.kowalski/32/36_2.png) [@michal.kowalski](https://community.ecumaster.com/u/michal.kowalski)\
**Post date:** [October 14, 2025, 9:25am UTC](https://community.ecumaster.com/t/logging-data-in-pmu24dl/4581/5 "2025-10-14T09:25:02Z")

</div>

That’s a good idea. I don’t know the details of your setup, but that’s seems easy enough to do and will enable you to log the suspension travel directly in the ADU.