# M50B25 N/A Trigger setting

**URL:** https://community.ecumaster.com/t/m50b25-n-a-trigger-setting/1476
**Category:** EMU BLACK / CLASSIC
**Created:** [May 26, 2024, 5:48pm UTC](https://community.ecumaster.com/t/m50b25-n-a-trigger-setting/1476 "2024-05-26T17:48:20Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Mielito](https://avatars.discourse-cdn.com/v4/letter/m/dbc845/32.png) [@Mielito](https://community.ecumaster.com/u/Mielito)
#### Post date: [May 26, 2024, 5:48pm UTC](https://community.ecumaster.com/t/m50b25-n-a-trigger-setting/1476/1 "2024-05-26T17:48:20Z")

</div>

Hi Im trying to start bmw m50b25 single vanos full stock engine with ecumaster classic (old model grey box) with ecumaster PnP connector and ecumaster base map for this engine, I check injector signal and coil signal look like is working, I can see RPM, INJECTORS PW, VE, Ignition Angle, Map, TPS… everything looks good but the engine no start… I think is primary trigger setting problem, is my first time work with standalone ecu, I would appreciate any help, thanks.

 ![TRIGGER SETTING AND SCOPE](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/1X/283bb0c9f669873ee42a30fe20fb4fe15b2895a3.png)