# Mk1 focus rs DBW pedal pin out **URL:** \ **Category:** GENERAL\ **Created:** [October 3, 2024, 7:01am UTC](https://community.ecumaster.com/t/mk1-focus-rs-dbw-pedal-pin-out/2439 "2024-10-03T07:01:18Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![RussFRS](https://avatars.discourse-cdn.com/v4/letter/r/7cd45c/32.png) [@RussFRS](https://community.ecumaster.com/u/RussFRS)\ **Post date:** [October 3, 2024, 7:01am UTC](https://community.ecumaster.com/t/mk1-focus-rs-dbw-pedal-pin-out/2439/1 "2024-10-03T07:01:18Z")
Hello, Ive been trying to get my drive by wire working on mk1 focus rs. Im using a 60mm audi throttle and a mk1 focus diesel pedal, im struggling to understand how to wire in the focus pedal to the emu. Screen shot is the orginal ford diagram of the pedal ![Screenshot_20241003_075905_Drive](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/e/e74f5aed5b30f0c51f2e4dc3d9a84733ed8dd309.jpeg) Any help would be hugely appreciated Thanks ---
**Author:** ![derUltraTT](https://avatars.discourse-cdn.com/v4/letter/d/ba8739/32.png) [@derUltraTT](https://community.ecumaster.com/u/derUltraTT)\ **Post date:** [October 3, 2024, 7:12am UTC](https://community.ecumaster.com/t/mk1-focus-rs-dbw-pedal-pin-out/2439/2 "2024-10-03T07:12:48Z")
It seems ur pedal has 3 potis…for emu u can use 2. I would use the two left ones if u keep OEM harness. Then u need to put ground and 5V on PCM Pins 90 and 91 (usually it doesnt matter which is which). 4 and 5 then are ur signal wires. ---
**Author:** ![RussFRS](https://avatars.discourse-cdn.com/v4/letter/r/7cd45c/32.png) [@RussFRS](https://community.ecumaster.com/u/RussFRS)\ **Post date:** [October 3, 2024, 7:28am UTC](https://community.ecumaster.com/t/mk1-focus-rs-dbw-pedal-pin-out/2439/3 "2024-10-03T07:28:34Z")
Thankyou! Im not using the OEM harness for any engine controls. Ill try out your suggestion when i get back from work.