# Need help for connection 0221503417 coilpack to EMU BLACK

**URL:** <https://community.ecumaster.com/t/need-help-for-connection-0221503417-coilpack-to-emu-black/2934>\
**Category:** EMU BLACK / CLASSIC\
**Created:** [December 14, 2024, 1:57pm UTC](https://community.ecumaster.com/t/need-help-for-connection-0221503417-coilpack-to-emu-black/2934 "2024-12-14T13:57:20Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![artemis](https://avatars.discourse-cdn.com/v4/letter/a/91b2a8/32.png) [@artemis](https://community.ecumaster.com/u/artemis)\
**Post date:** [December 14, 2024, 1:57pm UTC](https://community.ecumaster.com/t/need-help-for-connection-0221503417-coilpack-to-emu-black/2934/1 "2024-12-14T13:57:20Z")

</div>

Hi all.  
I got Alfa Romeo 164 3.0 12v with 0221503417 coilpack with 4 pins input. Please guide me with right wiring to EMU BLACK and setup it in soft. Thanks for your assistance !  
#alfaromeo

---

<div class="post-metadata">

**Author:** ![Krzysztof](https://avatars.discourse-cdn.com/v4/letter/k/ed655f/32.png) [@Krzysztof](https://community.ecumaster.com/u/Krzysztof)\
**Post date:** [December 14, 2024, 6:15pm UTC](https://community.ecumaster.com/t/need-help-for-connection-0221503417-coilpack-to-emu-black/2934/2 "2024-12-14T18:15:17Z")

</div>

![bosch-0221503417-bp16c826](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/1/1e89e6231419f2a2a0da71a66b5bce9ae795b57a.webp)  
Power + vcc  
control ( - ,- ,- ) with ecumaster ignition output 1, 2, 3. This coil is without an amplifier.

---

<div class="post-metadata">

**Author:** ![artemis](https://avatars.discourse-cdn.com/v4/letter/a/91b2a8/32.png) [@artemis](https://community.ecumaster.com/u/artemis)\
**Post date:** [January 16, 2025, 7:31pm UTC](https://community.ecumaster.com/t/need-help-for-connection-0221503417-coilpack-to-emu-black/2934/3 "2025-01-16T19:31:36Z")

</div>

Krzysztof, Thank u very much for your answer!

---

<div class="post-metadata">

**Author:** ![artemis](https://avatars.discourse-cdn.com/v4/letter/a/91b2a8/32.png) [@artemis](https://community.ecumaster.com/u/artemis)\
**Post date:** [January 16, 2025, 7:37pm UTC](https://community.ecumaster.com/t/need-help-for-connection-0221503417-coilpack-to-emu-black/2934/4 "2025-01-16T19:37:21Z")

</div>

> [@Krzysztof](#):
>
> ecumaster ignition output

So, pin 8,16,9 right?

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/f/fb923cd00331f8e86fa735d1af377b665fe09ecd.jpeg)

---

<div class="post-metadata">

**Author:** ![Krzysztof](https://avatars.discourse-cdn.com/v4/letter/k/ed655f/32.png) [@Krzysztof](https://community.ecumaster.com/u/Krzysztof)\
**Post date:** [January 17, 2025, 10:12pm UTC](https://community.ecumaster.com/t/need-help-for-connection-0221503417-coilpack-to-emu-black/2934/5 "2025-01-17T22:12:16Z")

</div>

Yes, and then you set the order. You can always test the component in emu test outputs. Remember that the spark will be in two places at once.