# Need help for sync cam 1krfe

**URL:** https://community.ecumaster.com/t/need-help-for-sync-cam-1krfe/3312
**Category:** EMU BLACK / CLASSIC
**Created:** [March 7, 2025, 11:34am UTC](https://community.ecumaster.com/t/need-help-for-sync-cam-1krfe/3312 "2025-03-07T11:34:27Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![OASIIS](https://avatars.discourse-cdn.com/v4/letter/o/8e7dd6/32.png) [@OASIIS](https://community.ecumaster.com/u/OASIIS)
#### Post date: [March 7, 2025, 11:34am UTC](https://community.ecumaster.com/t/need-help-for-sync-cam-1krfe/3312/1 "2025-03-07T11:34:27Z")

</div>

Hello everyone, I am looking for help to configure my cam sensor.  
I can start and drive on the primary trigger, the scope is good, but I can’t configure it to start with the cam…

The car is a c1, 1krfe engine, the cam sensor has 3 teeth, 1 per cylinder, it passes in front of the sensor about 50 degrees before the tdc in the exhaust phase.  
Primary trigger 36-2.  
Thank you in advance for your help  
here is the scope and my settings

> **[2 fichiers sont disponibles au téléchargement](https://www.transfernow.net/en/bld?utm_source=20250307P31CSrOH)**
>
> Cliquez pour accéder au téléchargement des 2 fichiers (88.1 Ko) avec TransferNow

---

<div class="post-metadata">

### Author: ![FreedomHolland](https://avatars.discourse-cdn.com/v4/letter/f/6a8cbe/32.png) [@FreedomHolland](https://community.ecumaster.com/u/FreedomHolland)
#### Post date: [March 19, 2026, 9:10pm UTC](https://community.ecumaster.com/t/need-help-for-sync-cam-1krfe/3312/2 "2026-03-19T21:10:43Z")

</div>

Where you able to fix it this is my setting

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/e/e0050c71e2e307d20e6f9f858f32f46b7cc77bc2.jpeg)

I’m curious if your still active i have some questions about some things as well maybe we can help each other