# New EMU PRO software version 222.0 beta **URL:** \ **Category:** EMU PRO\ **Tags:** update\ **Created:** [July 31, 2025, 11:23am UTC](https://community.ecumaster.com/t/new-emu-pro-software-version-222-0-beta/4169 "2025-07-31T11:23:21Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Jan\_Matlag\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jan_matlag_ecumaster/32/1466_2.png) [@Jan\_Matlag\_ECUMASTER](https://community.ecumaster.com/u/Jan_Matlag_ECUMASTER)\ **Post date:** [July 31, 2025, 11:23am UTC](https://community.ecumaster.com/t/new-emu-pro-software-version-222-0-beta/4169/1 "2025-07-31T11:23:21Z")
Updated EMU PRO software version **222.0-beta** is now available. **What’s new:** - Added option to select whether Fuel Rail 1 or Fuel Rail 2 is used during cranking - LIN Wipers added (Ford Fiesta, Toyota Supra MK5, Bosch WDA) - LIN Water pump added (Pierburg CWA400) - Added new Gap Detection options in Trigger Primary for engines with a high compression ratio - Added initialization state for Throttle Position Sensor diagnostics when a SENT-over-CAN sensor is configured. This gives the GDI driver a 2-second startup window to start sending SENT data. - DBW Tuner now supports throttle position sensors with an inverted (falling) main signal characteristic. - Improved DBW Tuner compatibility with throttle bodies where the limp position is 0%. For the full list of changes, check out the changelog. Download EMU PRO software version 222.0-beta today! [http://www.ecumaster.com/testVersions.html](http://www.ecumaster.com/testVersions.html) Sincerely, The Ecumaster Team ![EMU_pro_16_front_community](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/1X/def9a5c8daad3a72996ce7dbe710bcd3af812a1c.jpeg) ---
**Author:** ![ProperTuningOG](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/propertuningog/32/3481_2.png) [@ProperTuningOG](https://community.ecumaster.com/u/ProperTuningOG)\ **Post date:** [August 5, 2025, 8:02pm UTC](https://community.ecumaster.com/t/new-emu-pro-software-version-222-0-beta/4169/2 "2025-08-05T20:02:55Z")
Rail 2 cranking works perfect, thank you!! Should have this Gen 3 coyote on the dyno tomorrow, I’ll get the cams all dialed in and send over all the DI setup. Thank you for the support!! ---
**Author:** ![FloorItGarage](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/flooritgarage/32/61_2.png) [@FloorItGarage](https://community.ecumaster.com/u/FloorItGarage)\ **Post date:** [September 23, 2025, 3:59am UTC](https://community.ecumaster.com/t/new-emu-pro-software-version-222-0-beta/4169/3 "2025-09-23T03:59:15Z")
I think I have found a usb stick logging issue, possibly similar to the 216.1 beta. I spent an entire day trying to get logs from a test session, was getting broken logs. It would record for a minute or two, then nothing for a few, then 2-12 seconds, then not etc. Also had 2 separate instances of it filling the USB drive with “USB-C” files, same amount as logs. They wouldn’t come off the drive and only way to get rid of them was formatting or delete all and ejecting. Confirmed the wiring (shielded), tried a few usb sticks, formatted them again, moved the usb stick to a cooler area etc. Nothing worked, downgraded to 220.1 and it worked as it should again. I’d rather not publish my serial number but I’ll DM/Email a dev who wants to see the logs. ---
**Author:** ![Jan\_Matlag\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jan_matlag_ecumaster/32/1466_2.png) [@Jan\_Matlag\_ECUMASTER](https://community.ecumaster.com/u/Jan_Matlag_ECUMASTER)\ **Post date:** [September 25, 2025, 9:03am UTC](https://community.ecumaster.com/t/new-emu-pro-software-version-222-0-beta/4169/4 "2025-09-25T09:03:31Z")
We did not touch the USB logger code between 220.1 and 222.0. Please send us your logs to [jan.matlag@ecumaster.com](mailto:jan.matlag@ecumaster.com), and we will investigate the issue. Thank you very much