# New software 3.032 is available! (update 3.032b) **URL:** \ **Category:** V3 SOFTWARE\ **Created:** [August 4, 2024, 12:39am UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969 "2024-08-04T00:39:20Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [August 5, 2024, 11:15pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/21 "2024-08-05T23:15:54Z")
it shows two values min and max. they are very near to each other and the numbers overlap ---
**Author:** ![reaper\_XD](https://avatars.discourse-cdn.com/v4/letter/r/9fc29f/32.png) [@reaper\_XD](https://community.ecumaster.com/u/reaper_XD)\ **Post date:** [August 6, 2024, 10:49am UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/22 "2024-08-06T10:49:39Z")
That is a very good change, I feel a lot of people will be getting confused with the way it works! ---
**Author:** ![Napkin](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/napkin/32/375_2.png) [@Napkin](https://community.ecumaster.com/u/Napkin)\ **Post date:** [August 6, 2024, 2:08pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/23 "2024-08-06T14:08:35Z")
so i am 3.032 at the moment. where to find the settings for the turbo speed divider etc? or is it just vss divider? and do i log just the vss input in hz? a bit of help would be cool. thx ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [August 6, 2024, 2:23pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/24 "2024-08-06T14:23:48Z")
Sensors / Other ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/2/2057bd75dff7d1cfc1efb0594d0619fc086d6a8b.png) ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [August 6, 2024, 3:12pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/26 "2024-08-06T15:12:52Z")
Probably you have version 3.031 in your ECU so this option wasn’t available 🙂 For FF temperature you need to go into Temperature sensor / Standard sensors and then select flex fuel for Fuel temperature sensor. ---
**Author:** ![Napkin](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/napkin/32/375_2.png) [@Napkin](https://community.ecumaster.com/u/Napkin)\ **Post date:** [August 6, 2024, 3:22pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/27 "2024-08-06T15:22:25Z")
me stupid. you were faster than me. i was on 3.032. really dont know. maybe because i set it to take data from emu and not from client at the startup. ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [August 6, 2024, 3:27pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/28 "2024-08-06T15:27:28Z")
it doesnt matter. the options always match the firmware in device when connected. ---
**Author:** ![Napkin](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/napkin/32/375_2.png) [@Napkin](https://community.ecumaster.com/u/Napkin)\ **Post date:** [August 6, 2024, 4:00pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/29 "2024-08-06T16:00:00Z")
i let you know tomorrow if i got a turbo speed signal 🙂 ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [August 6, 2024, 11:28pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/30 "2024-08-06T23:28:07Z")
New Windows client released. Please read the first post. ---
**Author:** ![ANDREI](https://avatars.discourse-cdn.com/v4/letter/a/9fc29f/32.png) [@ANDREI](https://community.ecumaster.com/u/ANDREI)\ **Post date:** [August 7, 2024, 6:20am UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/31 "2024-08-07T06:20:44Z")
Thank you. Dear Jadzwin, can you make the EPC light blink when there is knocking? ---
**Author:** ![f0xy](https://avatars.discourse-cdn.com/v4/letter/f/958977/32.png) [@f0xy](https://community.ecumaster.com/u/f0xy)\ **Post date:** [August 7, 2024, 2:53pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/32 "2024-08-07T14:53:04Z")
Is there any reason the short term trim now reads some number in the 90%'s where in the previous version(s) it would be +/- from zero? My idle is tuned to the correct AFR without short term trim, when enabled it flicks around between 94-97% on the display? ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/e/e7cdb4c9e78dd6dc4f969be3a904a5f5ebfb2efa.png) ---
**Author:** ![MickyMcFinnigan](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/mickymcfinnigan/32/113_2.png) [@MickyMcFinnigan](https://community.ecumaster.com/u/MickyMcFinnigan)\ **Post date:** [August 7, 2024, 2:54pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/33 "2024-08-07T14:54:13Z")
I was about to post the same question. my Short term trim reads like V2 used to as a factor of 100. so when pulling 5% fuel it shows 95% etc. ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [August 7, 2024, 3:10pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/34 "2024-08-07T15:10:31Z")
It is a bug in log channel definition. The fix will be soon. Thanks for reporting. Good news is the correction of the fuel is proper. ---
**Author:** ![cmm7v3](https://avatars.discourse-cdn.com/v4/letter/c/73ab20/32.png) [@cmm7v3](https://community.ecumaster.com/u/cmm7v3)\ **Post date:** [August 8, 2024, 12:33pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/35 "2024-08-08T12:33:08Z")
All AFRs follow target within .05 but the Autotune is asking for a very large correction. ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/0/057e519a3e4c887eabb3b6d95cc818184e844be7.png) ---
**Author:** ![Napkin](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/napkin/32/375_2.png) [@Napkin](https://community.ecumaster.com/u/Napkin)\ **Post date:** [August 8, 2024, 3:01pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/36 "2024-08-08T15:01:19Z")
![454424181_8471845566172306_3076638839299661992_n](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/5/5c973dded827259fd4054fac7277010356d34767.jpeg) thank you guys so much. big love to the ecumaster team ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [August 8, 2024, 9:28pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/37 "2024-08-08T21:28:41Z")
New version 3.032c is ready to download. It fixes this issue as well as the autotune. ---
**Author:** ![konrad](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/konrad/32/49_2.png) [@konrad](https://community.ecumaster.com/u/konrad)\ **Post date:** [August 8, 2024, 9:45pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/38 "2024-08-08T21:45:29Z")
Is there / was there the bug with Lambda 2 CAN? Fixed with this FW? My Lambda 2 CAN still in your lab, maybe it’s time to ask to send it back to me 🙂 ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [August 8, 2024, 9:54pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/39 "2024-08-08T21:54:36Z")
There wasnt any issue with lambda to CAN @ 0x664 ---
**Author:** ![Wtd](https://avatars.discourse-cdn.com/v4/letter/w/e19adc/32.png) [@Wtd](https://community.ecumaster.com/u/Wtd)\ **Post date:** [August 8, 2024, 10:49pm UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/40 "2024-08-08T22:49:06Z")
Not a huge issue but on my laptop I can’t see the top of the config table and are unable to move the window down. 3.032c ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/4/405a595ea64fad5e758b1d03664ff545d3c78fc7.png) ---
**Author:** ![Greg](https://avatars.discourse-cdn.com/v4/letter/g/71c47a/32.png) [@Greg](https://community.ecumaster.com/u/Greg)\ **Post date:** [August 9, 2024, 7:48am UTC](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969/41 "2024-08-09T07:48:19Z")
change resolution of the screen temporary do all setting you need and go back to previous … that’s work around it [Previous page](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969.md?page=1) [Next page](https://community.ecumaster.com/t/new-software-3-032-is-available-update-3-032b/1969.md?page=3)