# Overrun settings flames

**URL:** https://community.ecumaster.com/t/overrun-settings-flames/1928
**Category:** V3 SOFTWARE
**Created:** [July 29, 2024, 11:33am UTC](https://community.ecumaster.com/t/overrun-settings-flames/1928 "2024-07-29T11:33:59Z")
**Posts on this page:** 1
**Showing post:** 9

<div class="post-metadata">

### Author: ![norbert.parkita](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/norbert.parkita/32/40_2.png) [@norbert.parkita](https://community.ecumaster.com/u/norbert.parkita)
#### Post date: [August 19, 2024, 2:32pm UTC](https://community.ecumaster.com/t/overrun-settings-flames/1928/9 "2024-08-19T14:32:05Z")

</div>

To get flames from the exhaust, it’s best to inject a large amount of fuel with very retarded ignition timing and cut ignition events. Then, lean out the mixture, restore the ignition, and after ignition, inject more fuel again. It’s also important to slightly open the throttle.

 ![Flames](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/9/9af0cf71f619f8928f871e0bd7557812b8d41b9d.png)

---

_[View the full topic](https://community.ecumaster.com/t/overrun-settings-flames/1928)._