# Pinout tool for emu pro connectors

**URL:** <https://community.ecumaster.com/t/pinout-tool-for-emu-pro-connectors/1535>\
**Category:** EMU PRO\
**Created:** [June 3, 2024, 7:19pm UTC](https://community.ecumaster.com/t/pinout-tool-for-emu-pro-connectors/1535 "2024-06-03T19:19:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![derUltraTT](https://avatars.discourse-cdn.com/v4/letter/d/ba8739/32.png) [@derUltraTT](https://community.ecumaster.com/u/derUltraTT)\
**Post date:** [June 3, 2024, 7:19pm UTC](https://community.ecumaster.com/t/pinout-tool-for-emu-pro-connectors/1535/1 "2024-06-03T19:19:22Z")

</div>

Hi,

does anyone have a link for me for a proper pinout tool for the connector for emu pro?  
The holes are so small and i cant even get in with my smallest pinout tool. Internet is not a help since there is so much shit around.  
Thx a lot for some tipps.

---

<div class="post-metadata">

**Author:** ![ATS\_Scott](https://avatars.discourse-cdn.com/v4/letter/a/71e660/32.png) [@ATS\_Scott](https://community.ecumaster.com/u/ATS_Scott)\
**Post date:** [June 3, 2024, 9:48pm UTC](https://community.ecumaster.com/t/pinout-tool-for-emu-pro-connectors/1535/2 "2024-06-03T21:48:59Z")

</div>

No tool needed. Disconnect from ECU, and find the longer single white locking tab and push it in with a small screw driver, now any pin can be pulled out the wire side of the connector.