# R32 crank sensor

**URL:** <https://community.ecumaster.com/t/r32-crank-sensor/3536>\
**Category:** V3 SOFTWARE\
**Created:** [April 18, 2025, 3:12pm UTC](https://community.ecumaster.com/t/r32-crank-sensor/3536 "2025-04-18T15:12:44Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Benrebuilds](https://avatars.discourse-cdn.com/v4/letter/b/5f9b8f/32.png) [@Benrebuilds](https://community.ecumaster.com/u/Benrebuilds)\
**Post date:** [April 18, 2025, 3:12pm UTC](https://community.ecumaster.com/t/r32-crank-sensor/3536/1 "2025-04-18T15:12:44Z")

</div>

Does anyone have a pinout for vw r32 crank sensor. Just want to check mine is correctly wired as currently not working since wiring in emu

Pins 1 -3

Thanks  
Ben

---

<div class="post-metadata">

**Author:** ![Ivano1](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/ivano1/32/3313_2.png) [@Ivano1](https://community.ecumaster.com/u/Ivano1)\
**Post date:** [April 18, 2025, 3:36pm UTC](https://community.ecumaster.com/t/r32-crank-sensor/3536/2 "2025-04-18T15:36:25Z")

</div>

![IMG_0992](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/4/4d54c3f52c8584076ec48316c40c0d4324bbddd6.jpeg)

 ![IMG_0993](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/2/2d3549921662a2909def6791befb9db6de319ef7.jpeg)

I hope it’s useful

---

<div class="post-metadata">

**Author:** ![Ivano1](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/ivano1/32/3313_2.png) [@Ivano1](https://community.ecumaster.com/u/Ivano1)\
**Post date:** [April 18, 2025, 4:00pm UTC](https://community.ecumaster.com/t/r32-crank-sensor/3536/3 "2025-04-18T16:00:45Z")

</div>

to see if it works all you need is a magnet, it doesn’t need to be outside the engine block…just pass near and it should send the signal  
This schema isn’t a bible but depend of motor code for ecu pin but is similar,i have the schema of dsg and leverage but I have to look in the files

---

<div class="post-metadata">

**Author:** ![Benrebuilds](https://avatars.discourse-cdn.com/v4/letter/b/5f9b8f/32.png) [@Benrebuilds](https://community.ecumaster.com/u/Benrebuilds)\
**Post date:** [April 18, 2025, 4:53pm UTC](https://community.ecumaster.com/t/r32-crank-sensor/3536/4 "2025-04-18T16:53:06Z")

</div>

I have those already was just trying to check  
Which pin is sgnd which is signal ground etc  
Thanks for them though

---

<div class="post-metadata">

**Author:** ![Ivano1](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/ivano1/32/3313_2.png) [@Ivano1](https://community.ecumaster.com/u/Ivano1)\
**Post date:** [April 18, 2025, 4:57pm UTC](https://community.ecumaster.com/t/r32-crank-sensor/3536/5 "2025-04-18T16:57:33Z")

</div>

did you check the can bus resistance to the dsg? it’s the final circuit,I see you have a problem

 ![IMG_0994](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/c/c8410cfb0d5e40a33b5a41c2931e9d10ef4bac25.jpeg)

---

<div class="post-metadata">

**Author:** ![Benrebuilds](https://avatars.discourse-cdn.com/v4/letter/b/5f9b8f/32.png) [@Benrebuilds](https://community.ecumaster.com/u/Benrebuilds)\
**Post date:** [April 18, 2025, 5:28pm UTC](https://community.ecumaster.com/t/r32-crank-sensor/3536/6 "2025-04-18T17:28:35Z")

</div>

Yes i believe this is fine as it worked fine on oem ecu and all modules read fine