# RX8 ABS with Emublack

**URL:** <https://community.ecumaster.com/t/rx8-abs-with-emublack/3754>\
**Category:** GENERAL\
**Tags:** how-to\
**Created:** [May 23, 2025, 7:24am UTC](https://community.ecumaster.com/t/rx8-abs-with-emublack/3754 "2025-05-23T07:24:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rezor](https://avatars.discourse-cdn.com/v4/letter/r/fbc32d/32.png) [@rezor](https://community.ecumaster.com/u/rezor)\
**Post date:** [May 23, 2025, 7:24am UTC](https://community.ecumaster.com/t/rx8-abs-with-emublack/3754/1 "2025-05-23T07:24:28Z")

</div>

I’ve seen that Emu Black supports RX8 ABS, so I want to try swapping it to my project. I have following questions:

1. Don’t know how to distinguish Model 02, 03 etc. Tried to Google but found nothing.
2. Is the ABS pump enough to make it work, or do I need any extra controllers from RX8?

---

<div class="post-metadata">

**Author:** ![0x3ddiy](https://avatars.discourse-cdn.com/v4/letter/0/d2c977/32.png) [@0x3ddiy](https://community.ecumaster.com/u/0x3ddiy)\
**Post date:** [September 16, 2025, 7:54pm UTC](https://community.ecumaster.com/t/rx8-abs-with-emublack/3754/2 "2025-09-16T19:54:02Z")

</div>

anything on this? i have a k swap, my abs light is on