# Short Term Fuel Trim Setup **URL:** \ **Category:** V3 SOFTWARE\ **Created:** [August 27, 2024, 3:34pm UTC](https://community.ecumaster.com/t/short-term-fuel-trim-setup/2159 "2024-08-27T15:34:03Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Napkin](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/napkin/32/375_2.png) [@Napkin](https://community.ecumaster.com/u/Napkin)\ **Post date:** [August 27, 2024, 3:34pm UTC](https://community.ecumaster.com/t/short-term-fuel-trim-setup/2159/1 "2024-08-27T15:34:04Z")
hey guys, i know short term fuel trim is not how to correct a bad mapped car. but i just wanted to know how you setup the single trims like pid kp and pid ki as well as the lambda delay and prop.gaing and integral gain. i run a boosted vr engine maybe that helps. would love to see some examples. at the moment i run 3,58% prop. gain, 16% integral and a lambda delay of 500-100. i still did not played around with the kp and ki. maybe someone is willing to share some settings. thx ---
**Author:** ![Greg](https://avatars.discourse-cdn.com/v4/letter/g/71c47a/32.png) [@Greg](https://community.ecumaster.com/u/Greg)\ **Post date:** [August 27, 2024, 3:59pm UTC](https://community.ecumaster.com/t/short-term-fuel-trim-setup/2159/2 "2024-08-27T15:59:45Z")
Im not sure if short trim on v3 is like short trim on latest v2 but to get it responsive i had to use p - around 30 and i abput 15 with scaling vs air flow about 75%-80% on idle up to about 200% in 150 at full flow. ---
**Author:** ![Tagurit2365](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Tagurit2365](https://community.ecumaster.com/u/Tagurit2365)\ **Post date:** [November 16, 2024, 4:12pm UTC](https://community.ecumaster.com/t/short-term-fuel-trim-setup/2159/3 "2024-11-16T16:12:46Z")
Anyone care to share some short term fuel settings?