# Software 2.163 and higher
**URL:** https://community.ecumaster.com/t/software-2-163-and-higher/556
**Category:** EMU BLACK / CLASSIC
**Created:** [January 4, 2024, 9:59am UTC](https://community.ecumaster.com/t/software-2-163-and-higher/556 "2024-01-04T09:59:31Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@y.grand](https://community.ecumaster.com/u/y.grand)
#### Post date: [January 4, 2024, 9:59am UTC](https://community.ecumaster.com/t/software-2-163-and-higher/556/1 "2024-01-04T09:59:31Z")
Hello, I have an Audi with the 20v turbo engine and I use the Audi triggers which work very well, but when I switch to a software version 2.163 and above the engine no longer starts but the information shows that it synchronizes, I return to the 2.162 it starts.
I see that on 2.163 there are a lot of changes to these trigger points, has anyone had this problem?
Thank you for your help.
Best regards Yann
---
### Author:  [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)
#### Post date: [January 8, 2024, 12:28pm UTC](https://community.ecumaster.com/t/software-2-163-and-higher/556/2 "2024-01-08T12:28:24Z")
Could you please attach here the log from the latest firmware from cranking ?
And also please attach here you configuration for primary, CAM1 and CAM2 sensors.
---
### Author:  [@y.grand](https://community.ecumaster.com/u/y.grand)
#### Post date: [January 9, 2024, 6:45am UTC](https://community.ecumaster.com/t/software-2-163-and-higher/556/4 "2024-01-09T06:45:30Z")
Hello, thank you for your message, I’ve found the problem, I have the automatic gearbox which is activated in the settings when the soft is changed and which cuts off the injection when starting.
Best Regards Yann