# Software opinions **URL:** \ **Category:** V3 SOFTWARE\ **Created:** [January 14, 2024, 7:14pm UTC](https://community.ecumaster.com/t/software-opinions/604 "2024-01-14T19:14:50Z")\ **Posts on this page:** 20\ **Page:** 19
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [June 23, 2024, 9:36am UTC](https://community.ecumaster.com/t/software-opinions/604/365 "2024-06-23T09:36:53Z")
please pubslish scope log and calibration ---
**Author:** ![gtengines](https://avatars.discourse-cdn.com/v4/letter/g/8dc957/32.png) [@gtengines](https://community.ecumaster.com/u/gtengines)\ **Post date:** [June 24, 2024, 3:05pm UTC](https://community.ecumaster.com/t/software-opinions/604/366 "2024-06-24T15:05:53Z")
DBW settings - disable when no RPM working now differently? In my case TB is silent just until you press pedal ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [June 24, 2024, 3:17pm UTC](https://community.ecumaster.com/t/software-opinions/604/367 "2024-06-24T15:17:23Z")
Yes. It is disabled only when the pedal is not pressed. That behavior allows you to test and use DBW without the need to start the engine or change parameters. Have a good day Jakub ---
**Author:** ![gtengines](https://avatars.discourse-cdn.com/v4/letter/g/8dc957/32.png) [@gtengines](https://community.ecumaster.com/u/gtengines)\ **Post date:** [June 24, 2024, 5:57pm UTC](https://community.ecumaster.com/t/software-opinions/604/368 "2024-06-24T17:57:16Z")
Thanks Jakub…Im also missing deadband settings in DBW prevent 0,1% oscilation ---
**Author:** ![J2performance](https://avatars.discourse-cdn.com/v4/letter/j/7ea924/32.png) [@J2performance](https://community.ecumaster.com/u/J2performance)\ **Post date:** [June 25, 2024, 7:02pm UTC](https://community.ecumaster.com/t/software-opinions/604/369 "2024-06-25T19:02:41Z")
hi all. Tell me when will the nitrous function be added as i use it to control WMI injection many thanks ---
**Author:** ![Mikebau5](https://avatars.discourse-cdn.com/v4/letter/m/c5a1d2/32.png) [@Mikebau5](https://community.ecumaster.com/u/Mikebau5)\ **Post date:** [June 25, 2024, 7:10pm UTC](https://community.ecumaster.com/t/software-opinions/604/370 "2024-06-25T19:10:23Z")
Hi, I have a question about the RTA Algorithms. What’s the difference between 0, 1, 2 and 3? Thanks! ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [June 25, 2024, 8:41pm UTC](https://community.ecumaster.com/t/software-opinions/604/371 "2024-06-25T20:41:49Z")
> [@J2performance](#): > > when For next update the EWG support will be included and bugs fixed + some minor improvements. The Nitrous function will be available after that (I think about 2 weeks from now in version 3.031) ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [June 25, 2024, 8:42pm UTC](https://community.ecumaster.com/t/software-opinions/604/372 "2024-06-25T20:42:34Z")
It is for real time tuning on the dyno it calculates the VE table correction in different ways. ---
**Author:** ![Mikebau5](https://avatars.discourse-cdn.com/v4/letter/m/c5a1d2/32.png) [@Mikebau5](https://community.ecumaster.com/u/Mikebau5)\ **Post date:** [June 25, 2024, 8:59pm UTC](https://community.ecumaster.com/t/software-opinions/604/373 "2024-06-25T20:59:33Z")
I’ve used it before but never tested another algorithm. Is there an overview somewhere that shows the different ‘approaches’ to the RTA? ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [June 25, 2024, 9:08pm UTC](https://community.ecumaster.com/t/software-opinions/604/374 "2024-06-25T21:08:19Z")
No there isn’t. I will analyze the code and I let you know. ---
**Author:** ![ANDREI](https://avatars.discourse-cdn.com/v4/letter/a/9fc29f/32.png) [@ANDREI](https://community.ecumaster.com/u/ANDREI)\ **Post date:** [June 26, 2024, 5:51am UTC](https://community.ecumaster.com/t/software-opinions/604/375 "2024-06-26T05:51:24Z")
**Jadzwin\_ECUMASTER** Dq500 does not shift down on V3 when you want to accelerate in traffic. Everything was fine at V2. I pressed the accelerator pedal and depending on the pressure, it shifted down into 1-2-3 gears. On V3 it shifted down to 1 when it needs 2, at most to 2 when it needs 3. And it tries to pull in that gear until the required boost appears. ---
**Author:** ![Napkin](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/napkin/32/375_2.png) [@Napkin](https://community.ecumaster.com/u/Napkin)\ **Post date:** [June 26, 2024, 6:10am UTC](https://community.ecumaster.com/t/software-opinions/604/376 "2024-06-26T06:10:57Z")
you need to set the cranking rpm higher! ---
**Author:** ![gtengines](https://avatars.discourse-cdn.com/v4/letter/g/8dc957/32.png) [@gtengines](https://community.ecumaster.com/u/gtengines)\ **Post date:** [June 28, 2024, 6:55am UTC](https://community.ecumaster.com/t/software-opinions/604/377 "2024-06-28T06:55:17Z")
> [@Software opinions](https://community.ecumaster.com/t/software-opinions/604/368): > > Thanks Jakub…Im also missing deadband settings in DBW prevent 0,1% oscilation Have you any advice for me please? How to prevent 0,1% TB oscilation ? ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [June 28, 2024, 1:27pm UTC](https://community.ecumaster.com/t/software-opinions/604/378 "2024-06-28T13:27:24Z")
0,1% is a very low voltage difference and it can be caused by the noise (it is 0.005V) You can play with the friction factor and / or increase integral gain. But it can be electric noise. You can just ignore it as well. ---
**Author:** ![SeanB](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/seanb/32/52_2.png) [@SeanB](https://community.ecumaster.com/u/SeanB)\ **Post date:** [June 29, 2024, 8:32pm UTC](https://community.ecumaster.com/t/software-opinions/604/379 "2024-06-29T20:32:23Z")
Nothing much but noticed a typo under fuel composition. I think it should be a “,” instead of “m” ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/3/3c52b913f73da0d18144adc29bac1ff08b88f692.jpeg) ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [June 29, 2024, 8:44pm UTC](https://community.ecumaster.com/t/software-opinions/604/380 "2024-06-29T20:44:40Z")
## Thanks! Fixed 🙂 ---
**Author:** ![SeanB](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/seanb/32/52_2.png) [@SeanB](https://community.ecumaster.com/u/SeanB)\ **Post date:** [June 29, 2024, 9:03pm UTC](https://community.ecumaster.com/t/software-opinions/604/381 "2024-06-29T21:03:59Z")
Would it be possible to remove the restriction of Max 60% in Ethanol corrections so I can use this table when blending Methanol with Flex fuel as it requires a lot more fuel to be added than Ethanol. ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [June 29, 2024, 9:07pm UTC](https://community.ecumaster.com/t/software-opinions/604/382 "2024-06-29T21:07:07Z")
Please use the Custom correction instead and put Ethanol content on the axis ---
**Author:** ![SeanB](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/seanb/32/52_2.png) [@SeanB](https://community.ecumaster.com/u/SeanB)\ **Post date:** [June 29, 2024, 9:09pm UTC](https://community.ecumaster.com/t/software-opinions/604/383 "2024-06-29T21:09:17Z")
And 0 out the Ethanol correction table? ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [June 29, 2024, 9:28pm UTC](https://community.ecumaster.com/t/software-opinions/604/384 "2024-06-29T21:28:17Z")
Depends on you. In Custom correction table you can add up to 155% fuel. If it is enough, set the ethanol correction to 0% [Previous page](https://community.ecumaster.com/t/software-opinions/604.md?page=18) [Next page](https://community.ecumaster.com/t/software-opinions/604.md?page=20)