# Software version 3.018 **URL:** \ **Category:** V3 SOFTWARE\ **Created:** [January 31, 2024, 6:16pm UTC](https://community.ecumaster.com/t/software-version-3-018/681 "2024-01-31T18:16:46Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [January 31, 2024, 6:16pm UTC](https://community.ecumaster.com/t/software-version-3-018/681/1 "2024-01-31T18:16:46Z")
Hi! I worked hard to release new software version 3.018 [https://www.ecumaster.com/files/EMU\_BLACK\_V3/EMUBlackV3Setup\_3\_018b.exe](https://www.ecumaster.com/files/EMU_BLACK_V3/EMUBlackV3Setup_3_018b.exe) Here is a list of updates / fixes. 1. Help for Sensors and inputs finished. I plan the similar quality for other categories. 2. Help updated for WBO, DSG emulator 3. WBO response improved 4. WBO temperature channel added 5. Temperature wiazrds improved. Min max voltage and temperature added 6. BMW E46 CAN stream: curisue control acive lamp support added 7. Bug with saving gauges types fixed 8. 5x3 RGB keypad added 9. Indicator key type - it is possible to display function’s results on the keypad 10. DSG emulation using keypad 11. idle DC for PWM solenoids works now that 0% means min DC, 100% means max DC 12. 3 wire pwm idle solenoid support fixed 13. DSG DC Corerction - 0% means no correction 14. stuck throttle strategy verified 15. Triggern configuration warning message bug fixed (bug reported by SamiN) 16. New shortcuts F5- scope, F6 - log graph, F7 - quick tune 17. Channels fuel pressure ,custom fuel corrections #1-#3 shown -100% when engine was not running. 18. Cycling idle can override DBW 19. Spelling fixed 20. F1 displays general help 21. Scope doesnt display not assigned cylinders in firing order table 22. DSG gearbox - engine can be started on P and N as well ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [January 31, 2024, 10:00pm UTC](https://community.ecumaster.com/t/software-version-3-018/681/2 "2024-01-31T22:00:25Z")
---
**Author:** ![SamiN](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/samin/32/208_2.png) [@SamiN](https://community.ecumaster.com/u/SamiN)\ **Post date:** [February 3, 2024, 6:22pm UTC](https://community.ecumaster.com/t/software-version-3-018/681/3 "2024-02-03T18:22:24Z")
Tested 3018b - VE table cursor randomly stops following Y-axis, moves only along X-axis (edit to add: restarting client resolves this but happened many times) - Autotune does not work at all. Files attached. ![Autotune_V3018](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/1X/99350459a0e82b95698024fc52289ff714bfa02d.png) [VROD\_BASE\_140kpa\_V3018\_AutotuneTest.emublog3](https://community.ecumaster.com/uploads/short-url/cYp2IEbecKYhLEo9xKG00EmMLYl.emublog3) (115.8 KB) [VROD\_BASE\_140kpa\_V3018.emub3](https://community.ecumaster.com/uploads/short-url/YJeAwtsbEZKipsFIcfjen6cRIK.emub3) (54.0 KB) ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [February 3, 2024, 8:53pm UTC](https://community.ecumaster.com/t/software-version-3-018/681/4 "2024-02-03T20:53:26Z")
Autotune bug will be fixed in 2.019, we are already aware of this problem. Could you give more details about not tracking y axis ? Maybe way to reproduce ? ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [February 3, 2024, 10:44pm UTC](https://community.ecumaster.com/t/software-version-3-018/681/5 "2024-02-03T22:44:33Z")
I found that there is a problem with autotune what changes the VE table Y axis desctiptor so it stops to work with RPM. Will be fixed fo 2.019 ---
**Author:** ![SamiN](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/samin/32/208_2.png) [@SamiN](https://community.ecumaster.com/u/SamiN)\ **Post date:** [February 3, 2024, 11:28pm UTC](https://community.ecumaster.com/t/software-version-3-018/681/6 "2024-02-03T23:28:37Z")
Yes that was in my screenshot too ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [February 8, 2024, 4:15pm UTC](https://community.ecumaster.com/t/software-version-3-018/681/7 "2024-02-08T16:15:45Z")