# Temp sensor calibration table

**URL:** <https://community.ecumaster.com/t/temp-sensor-calibration-table/2417>\
**Category:** EMU PRO\
**Created:** [September 30, 2024, 4:14am UTC](https://community.ecumaster.com/t/temp-sensor-calibration-table/2417 "2024-09-30T04:14:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![leon36](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/leon36/32/3523_2.png) [@leon36](https://community.ecumaster.com/u/leon36)\
**Post date:** [September 30, 2024, 4:14am UTC](https://community.ecumaster.com/t/temp-sensor-calibration-table/2417/1 "2024-09-30T04:14:10Z")

</div>

Hi, Im new to ECU master and i cant seem to figure out sensor calibration tables.  
I have an excel file for voltages for a user defined sensor with the pullup needed.  
Is there an easy way to input this data into the table (copy and paste) or do i have to input each value individually

---

<div class="post-metadata">

**Author:** ![Maciej.Ordowski\_ECUMASTER](https://avatars.discourse-cdn.com/v4/letter/m/e495f1/32.png) [@Maciej.Ordowski\_ECUMASTER](https://community.ecumaster.com/u/Maciej.Ordowski_ECUMASTER)\
**Post date:** [October 1, 2024, 8:57am UTC](https://community.ecumaster.com/t/temp-sensor-calibration-table/2417/2 "2024-10-01T08:57:02Z")

</div>

Hi,  
After configuring the sensor input source in “Sensors” section you would find the calibration table. On an X axis set the sensor voltage and fill the corresponding temperature values.  
Alternatively you can use a sensor wizard. Right click on a table (not an axis) and choose “Run temperature sensor wizard”.

 ![obraz](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/9/92a9fde4f9f32205953363d4e70c3eec43db9c58.png)

You can use one of the predefined sensors or use an “User defined” option and fill the values below.

![obraz](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/3/3e7edc62c077edb8de645c0200c879ed4d853f3c.png)