# TireTemp Cam and GPS built in support

**URL:** <https://community.ecumaster.com/t/tiretemp-cam-and-gps-built-in-support/1004>\
**Category:** EMU PRO\
**Created:** [April 8, 2024, 3:44pm UTC](https://community.ecumaster.com/t/tiretemp-cam-and-gps-built-in-support/1004 "2024-04-08T15:44:16Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![michal.kowalski](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/michal.kowalski/32/36_2.png) [@michal.kowalski](https://community.ecumaster.com/u/michal.kowalski)\
**Post date:** [April 22, 2024, 7:58am UTC](https://community.ecumaster.com/t/tiretemp-cam-and-gps-built-in-support/1004/3 "2024-04-22T07:58:37Z")

</div>

Hi Sami,  
as planned, we released a new version with the expanded GPS support: [New Data Master Software version 2024.4](https://community.ecumaster.com/t/new-data-master-software-version-2024-4/1162)

If you start a new Circuit project in the Data Master it should work from the start, however you may have to define your ‘@GPS\_LATITUDE’ and ‘@GPS\_LONGITUDE’ channels in the Tools/Maths Editor (F7):

 ![obraz](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/1X/6f43da2f1f046dcf4a4e4867d0aa3dba65259883.png)

For more details, you can check the Data Master manual or ask here directly.

---

_[View the full topic](https://community.ecumaster.com/t/tiretemp-cam-and-gps-built-in-support/1004)._